~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~ [ freetext search ] ~ [ file search ] ~

Linux Cross Reference
Linux/Documentation/networking/dmfe.txt

Version: ~ [ 2.4.0 ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1   dmfe.c: Version 1.28        01/18/2000
  2 
  3         A Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux. 
  4         Copyright (C) 1997  Sten Wang
  5 
  6         This program is free software; you can redistribute it and/or
  7         modify it under the terms of the GNU General Public License
  8         as published by the Free Software Foundation; either version 2
  9         of the License, or (at your option) any later version.
 10 
 11         This program is distributed in the hope that it will be useful,
 12         but WITHOUT ANY WARRANTY; without even the implied warranty of
 13         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 14         GNU General Public License for more details.
 15 
 16 
 17   A. Compiler command:
 18 
 19      A-1: For normal single or multiple processor kernel
 20           "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall 
 21             -Wstrict-prototypes -O6 -c dmfe.c"
 22 
 23      A-2: For single or multiple processor with kernel module version function
 24           "gcc -DMODULE -DMODVERSIONS -D__KERNEL__ -I/usr/src/linux/net/inet 
 25             -Wall -Wstrict-prototypes -O6 -c dmfe.c"
 26 
 27 
 28   B. The following steps teach you how to activate a DM9102 board:
 29 
 30         1. Used the upper compiler command to compile dmfe.c
 31 
 32         2. Insert dmfe module into kernel
 33            "insmod dmfe"        ;;Auto Detection Mode (Suggest)
 34            "insmod dmfe mode=0" ;;Force 10M Half Duplex
 35            "insmod dmfe mode=1" ;;Force 100M Half Duplex
 36            "insmod dmfe mode=4" ;;Force 10M Full Duplex
 37            "insmod dmfe mode=5" ;;Force 100M Full Duplex
 38 
 39         3. Config a dm9102 network interface
 40            "ifconfig eth0 172.22.3.18"
 41                           ^^^^^^^^^^^ Your IP address
 42 
 43         4. Activate the IP routing table. For some distributions, it is not
 44            necessary. You can type "route" to check.
 45 
 46            "route add default eth0"
 47 
 48 
 49         5. Well done. Your DM9102 adapter is now activated.
 50 
 51 
 52    C. Object files description:
 53         1. dmfe_rh61.o:         For Redhat 6.1
 54 
 55         If you can make sure your kernel version, you can rename
 56         to dmfe.o and directly use it without re-compiling.
 57 
 58 
 59   Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~ [ freetext search ] ~ [ file search ] ~

This page was automatically generated by the LXR engine.
Visit the LXR main site for more information.