1 modprobe sound
2 insmod ad1848
3 insmod gus io=* irq=* dma=* ...
4
5 This loads the driver for the Gravis Ultrasound family of sound cards.
6
7 The gus module takes the following arguments
8
9 io I/O address of the Ultrasound card (eg. io=0x220)
10 irq IRQ of the Sound Blaster card
11 dma DMA channel for the Sound Blaster
12 dma16 2nd DMA channel, only needed for full duplex operation
13 type 1 for PnP card
14 gus16 1 for using 16 bit sampling daughter board
15 no_wave_dma Set to disable DMA usage for wavetable (see note)
16 db16 ???
17
18
19 no_wave_dma option
20
21 This option defaults to a value of 0, which allows the Ultrasound wavetable
22 DSP to use DMA for for playback and downloading samples. This is the same
23 as the old behaviour. If set to 1, no DMA is needed for downloading samples,
24 and allows owners of a GUS MAX to make use of simultaneous digital audio
25 (/dev/dsp), MIDI, and wavetable playback.
26
27
28 If you have problems in recording with GUS MAX, you could try to use
29 just one 8 bit DMA channel. Recording will not work with one DMA
30 channel if it's a 16 bit one.
This page was automatically generated by the
LXR engine.
Visit the LXR main site for more
information.