1 INTRODUCTION
2
3 The USB Bluetooth driver supports any USB Bluetooth device.
4 It currently works well with the Linux USB Bluetooth stack from Axis
5 (available at http://developer.axis.com/software/bluetooth/ ) and
6 has been rumored to work with other Linux USB Bluetooth stacks.
7
8
9 CONFIGURATION
10
11 Currently the driver can handle up to 256 different USB Bluetooth
12 devices at once.
13
14 If you are not using devfs:
15 The major number that the driver uses is 216 so to use the driver,
16 create the following nodes:
17 mknod /dev/ttyUB0 c 216 0
18 mknod /dev/ttyUB1 c 216 1
19 mknod /dev/ttyUB2 c 216 2
20 mknod /dev/ttyUB3 c 216 3
21 .
22 .
23 .
24 mknod /dev/ttyUB254 c 216 254
25 mknod /dev/ttyUB255 c 216 255
26
27 If you are using devfs:
28 The devices supported by this driver will show up as
29 /dev/usb/ttub/{0,1,...}
30
31 When the device is connected and recognized by the driver, the driver
32 will print to the system log, which node the device has been bound to.
33
34
35 CONTACT:
36
37 If anyone has any problems using this driver, please contact me, or
38 join the Linux-USB mailing list (information on joining the mailing
39 list, as well as a link to its searchable archive is at
40 http://www.linux-usb.org/ )
41
42
43 Greg Kroah-Hartman
44 greg@kroah.com
This page was automatically generated by the
LXR engine.
Visit the LXR main site for more
information.