1 /*
2 * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports
3 * implementation.
4 * Copyright 1999 Richard Hirst <richard@sleepie.demon.co.uk>
5 *
6 * Based on atari_SCC.c which was
7 * Copyright 1994-95 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
8 * Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o
9 *
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file COPYING in the main directory of this archive
12 * for more details.
13 *
14 */
15
16 #include <linux/module.h>
17 #include <linux/config.h>
18 #include <linux/kdev_t.h>
19 #include <asm/io.h>
20 #include <linux/kernel.h>
21 #include <linux/sched.h>
22 #include <linux/ioport.h>
23 #include <linux/interrupt.h>
24 #include <linux/errno.h>
25 #include <linux/tty.h>
26 #include <linux/tty_flip.h>
27 #include <linux/mm.h>
28 #include <linux/serial.h>
29 #include <linux/fcntl.h>
30 #include <linux/major.h>
31 #include <linux/delay.h>
32 #include <linux/tqueue.h>
33 #include <linux/version.h>
34 #include <linux/malloc.h>
35 #include <linux/miscdevice.h>
36 #include <linux/console.h>
37 #include <linux/init.h>
38 #include <asm/setup.h>
39 #include <asm/bootinfo.h>
40
41 #ifdef CONFIG_MVME147_SCC
42 #include <asm/mvme147hw.h>
43 #endif
44 #ifdef CONFIG_MVME162_SCC
45 #include <asm/mvme16xhw.h>
46 #endif
47 #ifdef CONFIG_BVME6000_SCC
48 #include <asm/bvme6000hw.h>
49 #endif
50
51 #include <linux/generic_serial.h>
52 #include "scc.h"
53
54
55 #define CHANNEL_A 0
56 #define CHANNEL_B 1
57
58 #define SCC_MINOR_BASE 64
59
60 /* Shadows for all SCC write registers */
61 static unsigned char scc_shadow[2][16];
62
63 /* Location to access for SCC register access delay */
64 static volatile unsigned char *scc_del = NULL;
65
66 /* To keep track of STATUS_REG state for detection of Ext/Status int source */
67 static unsigned char scc_last_status_reg[2];
68
69 /***************************** Prototypes *****************************/
70
71 /* Function prototypes */
72 static void scc_disable_tx_interrupts(void * ptr);
73 static void scc_enable_tx_interrupts(void * ptr);
74 static void scc_disable_rx_interrupts(void * ptr);
75 static void scc_enable_rx_interrupts(void * ptr);
76 static int scc_get_CD(void * ptr);
77 static void scc_shutdown_port(void * ptr);
78 static int scc_set_real_termios(void *ptr);
79 static void scc_hungup(void *ptr);
80 static void scc_close(void *ptr);
81 static int scc_chars_in_buffer(void * ptr);
82 static int scc_open(struct tty_struct * tty, struct file * filp);
83 static int scc_ioctl(struct tty_struct * tty, struct file * filp,
84 unsigned int cmd, unsigned long arg);
85 static void scc_throttle(struct tty_struct *tty);
86 static void scc_unthrottle(struct tty_struct *tty);
87 static void scc_tx_int(int irq, void *data, struct pt_regs *fp);
88 static void scc_rx_int(int irq, void *data, struct pt_regs *fp);
89 static void scc_stat_int(int irq, void *data, struct pt_regs *fp);
90 static void scc_spcond_int(int irq, void *data, struct pt_regs *fp);
91 static void scc_setsignals(struct scc_port *port, int dtr, int rts);
92 static void scc_break_ctl(struct tty_struct *tty, int break_state);
93
94 static struct tty_driver scc_driver, scc_callout_driver;
95
96 static struct tty_struct *scc_table[2] = { NULL, };
97 static struct termios * scc_termios[2];
98 static struct termios * scc_termios_locked[2];
99 struct scc_port scc_ports[2];
100
101 int scc_refcount;
102 int scc_initialized = 0;
103
104 /*---------------------------------------------------------------------------
105 * Interface from generic_serial.c back here
106 *--------------------------------------------------------------------------*/
107
108 static struct real_driver scc_real_driver = {
109 scc_disable_tx_interrupts,
110 scc_enable_tx_interrupts,
111 scc_disable_rx_interrupts,
112 scc_enable_rx_interrupts,
113 scc_get_CD,
114 scc_shutdown_port,
115 scc_set_real_termios,
116 scc_chars_in_buffer,
117 scc_close,
118 scc_hungup,
119 NULL
120 };
121
122
123 /*----------------------------------------------------------------------------
124 * vme_scc_init() and support functions
125 *---------------------------------------------------------------------------*/
126
127 static int scc_init_drivers(void)
128 {
129 int error;
130
131 memset(&scc_driver, 0, sizeof(scc_driver));
132 scc_driver.magic = TTY_DRIVER_MAGIC;
133 scc_driver.driver_name = "scc";
134 scc_driver.name = "ttyS";
135 scc_driver.major = TTY_MAJOR;
136 scc_driver.minor_start = SCC_MINOR_BASE;
137 scc_driver.num = 2;
138 scc_driver.type = TTY_DRIVER_TYPE_SERIAL;
139 scc_driver.subtype = SERIAL_TYPE_NORMAL;
140 scc_driver.init_termios = tty_std_termios;
141 scc_driver.init_termios.c_cflag =
142 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
143 scc_driver.flags = TTY_DRIVER_REAL_RAW;
144 scc_driver.refcount = &scc_refcount;
145 scc_driver.table = scc_table;
146 scc_driver.termios = scc_termios;
147 scc_driver.termios_locked = scc_termios_locked;
148
149 scc_driver.open = scc_open;
150 scc_driver.close = gs_close;
151 scc_driver.write = gs_write;
152 scc_driver.put_char = gs_put_char;
153 scc_driver.flush_chars = gs_flush_chars;
154 scc_driver.write_room = gs_write_room;
155 scc_driver.chars_in_buffer = gs_chars_in_buffer;
156 scc_driver.flush_buffer = gs_flush_buffer;
157 scc_driver.ioctl = scc_ioctl;
158 scc_driver.throttle = scc_throttle;
159 scc_driver.unthrottle = scc_unthrottle;
160 scc_driver.set_termios = gs_set_termios;
161 scc_driver.stop = gs_stop;
162 scc_driver.start = gs_start;
163 scc_driver.hangup = gs_hangup;
164 scc_driver.break_ctl = scc_break_ctl;
165
166 scc_callout_driver = scc_driver;
167 scc_callout_driver.name = "cua";
168 scc_callout_driver.major = TTYAUX_MAJOR;
169 scc_callout_driver.subtype = SERIAL_TYPE_CALLOUT;
170
171 if ((error = tty_register_driver(&scc_driver))) {
172 printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n",
173 error);
174 return 1;
175 }
176 if ((error = tty_register_driver(&scc_callout_driver))) {
177 tty_unregister_driver(&scc_driver);
178 printk(KERN_ERR "scc: Couldn't register scc callout driver, error = %d\n",
179 error);
180 return 1;
181 }
182
183 return 0;
184 }
185
186
187 /* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1).
188 */
189
190 static void scc_init_portstructs(void)
191 {
192 struct scc_port *port;
193 int i;
194
195 for (i = 0; i < 2; i++) {
196 port = scc_ports + i;
197 port->gs.callout_termios = tty_std_termios;
198 port->gs.normal_termios = tty_std_termios;
199 port->gs.magic = SCC_MAGIC;
200 port->gs.close_delay = HZ/2;
201 port->gs.closing_wait = 30 * HZ;
202 port->gs.rd = &scc_real_driver;
203 #ifdef NEW_WRITE_LOCKING
204 port->gs.port_write_sem = MUTEX;
205 #endif
206 init_waitqueue_head(&port->gs.open_wait);
207 init_waitqueue_head(&port->gs.close_wait);
208 }
209 }
210
211
212 #ifdef CONFIG_MVME147_SCC
213 static int mvme147_scc_init(void)
214 {
215 struct scc_port *port;
216
217 printk("SCC: MVME147 Serial Driver\n");
218 /* Init channel A */
219 port = &scc_ports[0];
220 port->channel = CHANNEL_A;
221 port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR;
222 port->datap = port->ctrlp + 1;
223 port->port_a = &scc_ports[0];
224 port->port_b = &scc_ports[1];
225 request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
226 "SCC-A TX", port);
227 request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
228 "SCC-A status", port);
229 request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
230 "SCC-A RX", port);
231 request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
232 "SCC-A special cond", port);
233 {
234 SCC_ACCESS_INIT(port);
235
236 /* disable interrupts for this channel */
237 SCCwrite(INT_AND_DMA_REG, 0);
238 /* Set the interrupt vector */
239 SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE);
240 /* Interrupt parameters: vector includes status, status low */
241 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
242 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
243 }
244
245 /* Init channel B */
246 port = &scc_ports[1];
247 port->channel = CHANNEL_B;
248 port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR;
249 port->datap = port->ctrlp + 1;
250 port->port_a = &scc_ports[0];
251 port->port_b = &scc_ports[1];
252 request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
253 "SCC-B TX", port);
254 request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
255 "SCC-B status", port);
256 request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
257 "SCC-B RX", port);
258 request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
259 "SCC-B special cond", port);
260 {
261 SCC_ACCESS_INIT(port);
262
263 /* disable interrupts for this channel */
264 SCCwrite(INT_AND_DMA_REG, 0);
265 }
266
267 /* Ensure interrupts are enabled in the PCC chip */
268 m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB;
269
270 /* Initialise the tty driver structures and register */
271 scc_init_portstructs();
272 scc_init_drivers();
273
274 return 0;
275 }
276 #endif
277
278
279 #ifdef CONFIG_MVME162_SCC
280 static int mvme162_scc_init(void)
281 {
282 struct scc_port *port;
283
284 if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA))
285 return (-ENODEV);
286
287 printk("SCC: MVME162 Serial Driver\n");
288 /* Init channel A */
289 port = &scc_ports[0];
290 port->channel = CHANNEL_A;
291 port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR;
292 port->datap = port->ctrlp + 2;
293 port->port_a = &scc_ports[0];
294 port->port_b = &scc_ports[1];
295 request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
296 "SCC-A TX", port);
297 request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
298 "SCC-A status", port);
299 request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
300 "SCC-A RX", port);
301 request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
302 "SCC-A special cond", port);
303 {
304 SCC_ACCESS_INIT(port);
305
306 /* disable interrupts for this channel */
307 SCCwrite(INT_AND_DMA_REG, 0);
308 /* Set the interrupt vector */
309 SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE);
310 /* Interrupt parameters: vector includes status, status low */
311 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
312 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
313 }
314
315 /* Init channel B */
316 port = &scc_ports[1];
317 port->channel = CHANNEL_B;
318 port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR;
319 port->datap = port->ctrlp + 2;
320 port->port_a = &scc_ports[0];
321 port->port_b = &scc_ports[1];
322 request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
323 "SCC-B TX", port);
324 request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
325 "SCC-B status", port);
326 request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
327 "SCC-B RX", port);
328 request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
329 "SCC-B special cond", port);
330
331 {
332 SCC_ACCESS_INIT(port); /* Either channel will do */
333
334 /* disable interrupts for this channel */
335 SCCwrite(INT_AND_DMA_REG, 0);
336 }
337
338 /* Ensure interrupts are enabled in the MC2 chip */
339 *(volatile char *)0xfff4201d = 0x14;
340
341 /* Initialise the tty driver structures and register */
342 scc_init_portstructs();
343 scc_init_drivers();
344
345 return 0;
346 }
347 #endif
348
349
350 #ifdef CONFIG_BVME6000_SCC
351 static int bvme6000_scc_init(void)
352 {
353 struct scc_port *port;
354
355 printk("SCC: BVME6000 Serial Driver\n");
356 /* Init channel A */
357 port = &scc_ports[0];
358 port->channel = CHANNEL_A;
359 port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR;
360 port->datap = port->ctrlp + 4;
361 port->port_a = &scc_ports[0];
362 port->port_b = &scc_ports[1];
363 request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
364 "SCC-A TX", port);
365 request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
366 "SCC-A status", port);
367 request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
368 "SCC-A RX", port);
369 request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
370 "SCC-A special cond", port);
371 {
372 SCC_ACCESS_INIT(port);
373
374 /* disable interrupts for this channel */
375 SCCwrite(INT_AND_DMA_REG, 0);
376 /* Set the interrupt vector */
377 SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE);
378 /* Interrupt parameters: vector includes status, status low */
379 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
380 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
381 }
382
383 /* Init channel B */
384 port = &scc_ports[1];
385 port->channel = CHANNEL_B;
386 port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR;
387 port->datap = port->ctrlp + 4;
388 port->port_a = &scc_ports[0];
389 port->port_b = &scc_ports[1];
390 request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
391 "SCC-B TX", port);
392 request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
393 "SCC-B status", port);
394 request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
395 "SCC-B RX", port);
396 request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
397 "SCC-B special cond", port);
398
399 {
400 SCC_ACCESS_INIT(port); /* Either channel will do */
401
402 /* disable interrupts for this channel */
403 SCCwrite(INT_AND_DMA_REG, 0);
404 }
405
406 /* Initialise the tty driver structures and register */
407 scc_init_portstructs();
408 scc_init_drivers();
409
410 return 0;
411 }
412 #endif
413
414
415 int vme_scc_init(void)
416 {
417 int res = -ENODEV;
418 static int called = 0;
419
420 if (called)
421 return res;
422 called = 1;
423 #ifdef CONFIG_MVME147_SCC
424 if (MACH_IS_MVME147)
425 res = mvme147_scc_init();
426 #endif
427 #ifdef CONFIG_MVME162_SCC
428 if (MACH_IS_MVME16x)
429 res = mvme162_scc_init();
430 #endif
431 #ifdef CONFIG_BVME6000_SCC
432 if (MACH_IS_BVME6000)
433 res = bvme6000_scc_init();
434 #endif
435 return res;
436 }
437
438
439 /*---------------------------------------------------------------------------
440 * Interrupt handlers
441 *--------------------------------------------------------------------------*/
442
443 static void scc_rx_int(int irq, void *data, struct pt_regs *fp)
444 {
445 unsigned char ch;
446 struct scc_port *port = data;
447 struct tty_struct *tty = port->gs.tty;
448 SCC_ACCESS_INIT(port);
449
450 ch = SCCread_NB(RX_DATA_REG);
451 if (!tty) {
452 printk ("scc_rx_int with NULL tty!\n");
453 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
454 return;
455 }
456 if (tty->flip.count < TTY_FLIPBUF_SIZE) {
457 *tty->flip.char_buf_ptr = ch;
458 *tty->flip.flag_buf_ptr = 0;
459 tty->flip.flag_buf_ptr++;
460 tty->flip.char_buf_ptr++;
461 tty->flip.count++;
462 }
463
464 /* Check if another character is already ready; in that case, the
465 * spcond_int() function must be used, because this character may have an
466 * error condition that isn't signalled by the interrupt vector used!
467 */
468 if (SCCread(INT_PENDING_REG) &
469 (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) {
470 scc_spcond_int (irq, data, fp);
471 return;
472 }
473
474 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
475
476 tty_flip_buffer_push(tty);
477 }
478
479
480 static void scc_spcond_int(int irq, void *data, struct pt_regs *fp)
481 {
482 struct scc_port *port = data;
483 struct tty_struct *tty = port->gs.tty;
484 unsigned char stat, ch, err;
485 int int_pending_mask = port->channel == CHANNEL_A ?
486 IPR_A_RX : IPR_B_RX;
487 SCC_ACCESS_INIT(port);
488
489 if (!tty) {
490 printk ("scc_spcond_int with NULL tty!\n");
491 SCCwrite(COMMAND_REG, CR_ERROR_RESET);
492 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
493 return;
494 }
495 do {
496 stat = SCCread(SPCOND_STATUS_REG);
497 ch = SCCread_NB(RX_DATA_REG);
498
499 if (stat & SCSR_RX_OVERRUN)
500 err = TTY_OVERRUN;
501 else if (stat & SCSR_PARITY_ERR)
502 err = TTY_PARITY;
503 else if (stat & SCSR_CRC_FRAME_ERR)
504 err = TTY_FRAME;
505 else
506 err = 0;
507
508 if (tty->flip.count < TTY_FLIPBUF_SIZE) {
509 *tty->flip.char_buf_ptr = ch;
510 *tty->flip.flag_buf_ptr = err;
511 tty->flip.flag_buf_ptr++;
512 tty->flip.char_buf_ptr++;
513 tty->flip.count++;
514 }
515
516 /* ++TeSche: *All* errors have to be cleared manually,
517 * else the condition persists for the next chars
518 */
519 if (err)
520 SCCwrite(COMMAND_REG, CR_ERROR_RESET);
521
522 } while(SCCread(INT_PENDING_REG) & int_pending_mask);
523
524 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
525
526 tty_flip_buffer_push(tty);
527 }
528
529
530 static void scc_tx_int(int irq, void *data, struct pt_regs *fp)
531 {
532 struct scc_port *port = data;
533 SCC_ACCESS_INIT(port);
534
535 if (!port->gs.tty) {
536 printk ("scc_tx_int with NULL tty!\n");
537 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
538 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);
539 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
540 return;
541 }
542 while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) {
543 if (port->x_char) {
544 SCCwrite(TX_DATA_REG, port->x_char);
545 port->x_char = 0;
546 }
547 else if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
548 port->gs.tty->hw_stopped)
549 break;
550 else {
551 SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]);
552 port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1);
553 if (--port->gs.xmit_cnt <= 0)
554 break;
555 }
556 }
557 if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
558 port->gs.tty->hw_stopped) {
559 /* disable tx interrupts */
560 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
561 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); /* disable tx_int on next tx underrun? */
562 port->gs.flags &= ~GS_TX_INTEN;
563 }
564 if (port->gs.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars) {
565 if ((port->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
566 port->gs.tty->ldisc.write_wakeup)
567 (port->gs.tty->ldisc.write_wakeup)(port->gs.tty);
568 wake_up_interruptible(&port->gs.tty->write_wait);
569 }
570
571 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
572 }
573
574
575 static void scc_stat_int(int irq, void *data, struct pt_regs *fp)
576 {
577 struct scc_port *port = data;
578 unsigned channel = port->channel;
579 unsigned char last_sr, sr, changed;
580 SCC_ACCESS_INIT(port);
581
582 last_sr = scc_last_status_reg[channel];
583 sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG);
584 changed = last_sr ^ sr;
585
586 if (changed & SR_DCD) {
587 port->c_dcd = !!(sr & SR_DCD);
588 if (!(port->gs.flags & ASYNC_CHECK_CD))
589 ; /* Don't report DCD changes */
590 else if (port->c_dcd) {
591 if (~(port->gs.flags & ASYNC_NORMAL_ACTIVE) ||
592 ~(port->gs.flags & ASYNC_CALLOUT_ACTIVE)) {
593 /* Are we blocking in open?*/
594 wake_up_interruptible(&port->gs.open_wait);
595 }
596 }
597 else {
598 if (!((port->gs.flags & ASYNC_CALLOUT_ACTIVE) &&
599 (port->gs.flags & ASYNC_CALLOUT_NOHUP))) {
600 if (port->gs.tty)
601 tty_hangup (port->gs.tty);
602 }
603 }
604 }
605 SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET);
606 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
607 }
608
609
610 /*---------------------------------------------------------------------------
611 * generic_serial.c callback funtions
612 *--------------------------------------------------------------------------*/
613
614 static void scc_disable_tx_interrupts(void *ptr)
615 {
616 struct scc_port *port = ptr;
617 unsigned long flags;
618 SCC_ACCESS_INIT(port);
619
620 save_flags(flags);
621 cli();
622 SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
623 port->gs.flags &= ~GS_TX_INTEN;
624 restore_flags(flags);
625 }
626
627
628 static void scc_enable_tx_interrupts(void *ptr)
629 {
630 struct scc_port *port = ptr;
631 unsigned long flags;
632 SCC_ACCESS_INIT(port);
633
634 save_flags(flags);
635 cli();
636 SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB);
637 /* restart the transmitter */
638 scc_tx_int (0, port, 0);
639 restore_flags(flags);
640 }
641
642
643 static void scc_disable_rx_interrupts(void *ptr)
644 {
645 struct scc_port *port = ptr;
646 unsigned long flags;
647 SCC_ACCESS_INIT(port);
648
649 save_flags(flags);
650 cli();
651 SCCmod(INT_AND_DMA_REG,
652 ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0);
653 restore_flags(flags);
654 }
655
656
657 static void scc_enable_rx_interrupts(void *ptr)
658 {
659 struct scc_port *port = ptr;
660 unsigned long flags;
661 SCC_ACCESS_INIT(port);
662
663 save_flags(flags);
664 cli();
665 SCCmod(INT_AND_DMA_REG, 0xff,
666 IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL);
667 restore_flags(flags);
668 }
669
670
671 static int scc_get_CD(void *ptr)
672 {
673 struct scc_port *port = ptr;
674 unsigned channel = port->channel;
675
676 return !!(scc_last_status_reg[channel] & SR_DCD);
677 }
678
679
680 static void scc_shutdown_port(void *ptr)
681 {
682 struct scc_port *port = ptr;
683
684 port->gs.flags &= ~ GS_ACTIVE;
685 if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) {
686 scc_setsignals (port, 0, 0);
687 }
688 }
689
690
691 static int scc_set_real_termios (void *ptr)
692 {
693 /* the SCC has char sizes 5,7,6,8 in that order! */
694 static int chsize_map[4] = { 0, 2, 1, 3 };
695 unsigned cflag, baud, chsize, channel, brgval = 0;
696 unsigned long flags;
697 struct scc_port *port = ptr;
698 SCC_ACCESS_INIT(port);
699
700 if (!port->gs.tty || !port->gs.tty->termios) return 0;
701
702 channel = port->channel;
703
704 if (channel == CHANNEL_A)
705 return 0; /* Settings controlled by boot PROM */
706
707 cflag = port->gs.tty->termios->c_cflag;
708 baud = port->gs.baud;
709 chsize = (cflag & CSIZE) >> 4;
710
711 if (baud == 0) {
712 /* speed == 0 -> drop DTR */
713 save_flags(flags);
714 cli();
715 SCCmod(TX_CTRL_REG, ~TCR_DTR, 0);
716 restore_flags(flags);
717 return 0;
718 }
719 else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) ||
720 (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) ||
721 (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) {
722 printk("SCC: Bad speed requested, %d\n", baud);
723 return 0;
724 }
725
726 if (cflag & CLOCAL)
727 port->gs.flags &= ~ASYNC_CHECK_CD;
728 else
729 port->gs.flags |= ASYNC_CHECK_CD;
730
731 #ifdef CONFIG_MVME147_SCC
732 if (MACH_IS_MVME147)
733 brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
734 else
735 #endif
736 #ifdef CONFIG_MVME162_SCC
737 if (MACH_IS_MVME16x)
738 brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
739 else
740 #endif
741 #ifdef CONFIG_BVME6000_SCC
742 if (MACH_IS_BVME6000)
743 brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2;
744 #endif
745 /* Now we have all parameters and can go to set them: */
746 save_flags(flags);
747 cli();
748
749 /* receiver's character size and auto-enables */
750 SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE),
751 (chsize_map[chsize] << 6) |
752 ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0));
753 /* parity and stop bits (both, Tx and Rx), clock mode never changes */
754 SCCmod (AUX1_CTRL_REG,
755 ~(A1CR_PARITY_MASK | A1CR_MODE_MASK),
756 ((cflag & PARENB
757 ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN)
758 : A1CR_PARITY_NONE)
759 | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1)));
760 /* sender's character size, set DTR for valid baud rate */
761 SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR);
762 /* clock sources never change */
763 /* disable BRG before changing the value */
764 SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0);
765 /* BRG value */
766 SCCwrite(TIMER_LOW_REG, brgval & 0xff);
767 SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff);
768 /* BRG enable, and clock source never changes */
769 SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB);
770
771 restore_flags(flags);
772
773 return 0;
774 }
775
776
777 static int scc_chars_in_buffer (void *ptr)
778 {
779 struct scc_port *port = ptr;
780 SCC_ACCESS_INIT(port);
781
782 return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0 : 1;
783 }
784
785
786 static void scc_hungup(void *ptr)
787 {
788 scc_disable_tx_interrupts(ptr);
789 scc_disable_rx_interrupts(ptr);
790 MOD_DEC_USE_COUNT;
791 }
792
793
794 static void scc_close(void *ptr)
795 {
796 scc_disable_tx_interrupts(ptr);
797 scc_disable_rx_interrupts(ptr);
798 }
799
800
801 /*---------------------------------------------------------------------------
802 * Internal support functions
803 *--------------------------------------------------------------------------*/
804
805 static void scc_setsignals(struct scc_port *port, int dtr, int rts)
806 {
807 unsigned long flags;
808 unsigned char t;
809 SCC_ACCESS_INIT(port);
810
811 save_flags(flags);
812 t = SCCread(TX_CTRL_REG);
813 if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR);
814 if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS);
815 SCCwrite(TX_CTRL_REG, t);
816 restore_flags(flags);
817 }
818
819
820 static void scc_send_xchar(struct tty_struct *tty, char ch)
821 {
822 struct scc_port *port = (struct scc_port *)tty->driver_data;
823
824 port->x_char = ch;
825 if (ch)
826 scc_enable_tx_interrupts(port);
827 }
828
829
830 /*---------------------------------------------------------------------------
831 * Driver entrypoints referenced from above
832 *--------------------------------------------------------------------------*/
833
834 static int scc_open (struct tty_struct * tty, struct file * filp)
835 {
836 int line = MINOR(tty->device) - SCC_MINOR_BASE;
837 int retval;
838 struct scc_port *port = &scc_ports[line];
839 int i, channel = port->channel;
840 unsigned long flags;
841 SCC_ACCESS_INIT(port);
842 #if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC)
843 static const struct {
844 unsigned reg, val;
845 } mvme_init_tab[] = {
846 /* Values for MVME162 and MVME147 */
847 /* no parity, 1 stop bit, async, 1:16 */
848 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
849 /* parity error is special cond, ints disabled, no DMA */
850 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
851 /* Rx 8 bits/char, no auto enable, Rx off */
852 { RX_CTRL_REG, RCR_CHSIZE_8 },
853 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
854 { TX_CTRL_REG, TCR_CHSIZE_8 },
855 /* special features off */
856 { AUX2_CTRL_REG, 0 },
857 { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG },
858 { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK },
859 /* Start Rx */
860 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
861 /* Start Tx */
862 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
863 /* Ext/Stat ints: DCD only */
864 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
865 /* Reset Ext/Stat ints */
866 { COMMAND_REG, CR_EXTSTAT_RESET },
867 /* ...again */
868 { COMMAND_REG, CR_EXTSTAT_RESET },
869 };
870 #endif
871 #if defined(CONFIG_BVME6000_SCC)
872 static const struct {
873 unsigned reg, val;
874 } bvme_init_tab[] = {
875 /* Values for BVME6000 */
876 /* no parity, 1 stop bit, async, 1:16 */
877 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
878 /* parity error is special cond, ints disabled, no DMA */
879 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
880 /* Rx 8 bits/char, no auto enable, Rx off */
881 { RX_CTRL_REG, RCR_CHSIZE_8 },
882 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
883 { TX_CTRL_REG, TCR_CHSIZE_8 },
884 /* special features off */
885 { AUX2_CTRL_REG, 0 },
886 { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG },
887 { DPLL_CTRL_REG, DCR_BRG_ENAB },
888 /* Start Rx */
889 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
890 /* Start Tx */
891 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
892 /* Ext/Stat ints: DCD only */
893 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
894 /* Reset Ext/Stat ints */
895 { COMMAND_REG, CR_EXTSTAT_RESET },
896 /* ...again */
897 { COMMAND_REG, CR_EXTSTAT_RESET },
898 };
899 #endif
900 if (!(port->gs.flags & ASYNC_INITIALIZED)) {
901 save_flags(flags);
902 cli();
903 #if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC)
904 if (MACH_IS_MVME147 || MACH_IS_MVME16x) {
905 for (i=0; i<sizeof(mvme_init_tab)/sizeof(*mvme_init_tab); ++i)
906 SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val);
907 }
908 #endif
909 #if defined(CONFIG_BVME6000_SCC)
910 if (MACH_IS_BVME6000) {
911 for (i=0; i<sizeof(bvme_init_tab)/sizeof(*bvme_init_tab); ++i)
912 SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val);
913 }
914 #endif
915
916 /* remember status register for detection of DCD and CTS changes */
917 scc_last_status_reg[channel] = SCCread(STATUS_REG);
918
919 port->c_dcd = 0; /* Prevent initial 1->0 interrupt */
920 scc_setsignals (port, 1,1);
921 restore_flags(flags);
922 }
923
924 tty->driver_data = port;
925 port->gs.tty = tty;
926 port->gs.count++;
927 retval = gs_init_port(&port->gs);
928 if (retval) {
929 port->gs.count--;
930 return retval;
931 }
932 port->gs.flags |= GS_ACTIVE;
933 if (port->gs.count == 1) {
934 MOD_INC_USE_COUNT;
935 }
936 retval = block_til_ready(port, filp);
937
938 if (retval) {
939 MOD_DEC_USE_COUNT;
940 port->gs.count--;
941 return retval;
942 }
943
944 if ((port->gs.count == 1) && (port->gs.flags & ASYNC_SPLIT_TERMIOS)) {
945 if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
946 *tty->termios = port->gs.normal_termios;
947 else
948 *tty->termios = port->gs.callout_termios;
949 scc_set_real_termios (port);
950 }
951
952 port->gs.session = current->session;
953 port->gs.pgrp = current->pgrp;
954 port->c_dcd = scc_get_CD (port);
955
956 scc_enable_rx_interrupts(port);
957
958 return 0;
959 }
960
961
962 static void scc_throttle (struct tty_struct * tty)
963 {
964 struct scc_port *port = (struct scc_port *)tty->driver_data;
965 unsigned long flags;
966 SCC_ACCESS_INIT(port);
967
968 if (tty->termios->c_cflag & CRTSCTS) {
969 save_flags(flags);
970 cli();
971 SCCmod(TX_CTRL_REG, ~TCR_RTS, 0);
972 restore_flags(flags);
973 }
974 if (I_IXOFF(tty))
975 scc_send_xchar(tty, STOP_CHAR(tty));
976 }
977
978
979 static void scc_unthrottle (struct tty_struct * tty)
980 {
981 struct scc_port *port = (struct scc_port *)tty->driver_data;
982 unsigned long flags;
983 SCC_ACCESS_INIT(port);
984
985 if (tty->termios->c_cflag & CRTSCTS) {
986 save_flags(flags);
987 cli();
988 SCCmod(TX_CTRL_REG, 0xff, TCR_RTS);
989 restore_flags(flags);
990 }
991 if (I_IXOFF(tty))
992 scc_send_xchar(tty, START_CHAR(tty));
993 }
994
995
996 static int scc_ioctl(struct tty_struct *tty, struct file *file,
997 unsigned int cmd, unsigned long arg)
998 {
999 return -ENOIOCTLCMD;
1000 }
1001
1002
1003 static void scc_break_ctl(struct tty_struct *tty, int break_state)
1004 {
1005 struct scc_port *port = (struct scc_port *)tty->driver_data;
1006 unsigned long flags;
1007 SCC_ACCESS_INIT(port);
1008
1009 save_flags(flags);
1010 cli();
1011 SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK,
1012 break_state ? TCR_SEND_BREAK : 0);
1013 restore_flags(flags);
1014 }
1015
1016
1017 /*---------------------------------------------------------------------------
1018 * Serial console stuff...
1019 *--------------------------------------------------------------------------*/
1020
1021 #define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0)
1022
1023 static void scc_ch_write (char ch)
1024 {
1025 volatile char *p = NULL;
1026
1027 #ifdef CONFIG_MVME147_SCC
1028 if (MACH_IS_MVME147)
1029 p = (volatile char *)M147_SCC_A_ADDR;
1030 #endif
1031 #ifdef CONFIG_MVME162_SCC
1032 if (MACH_IS_MVME16x)
1033 p = (volatile char *)MVME_SCC_A_ADDR;
1034 #endif
1035 #ifdef CONFIG_BVME6000_SCC
1036 if (MACH_IS_BVME6000)
1037 p = (volatile char *)BVME_SCC_A_ADDR;
1038 #endif
1039
1040 do {
1041 scc_delay();
1042 }
1043 while (!(*p & 4));
1044 scc_delay();
1045 *p = 8;
1046 scc_delay();
1047 *p = ch;
1048 }
1049
1050 /* The console_lock must be held when we get here. */
1051
1052 static void scc_console_write (struct console *co, const char *str, unsigned count)
1053 {
1054 unsigned long flags;
1055
1056 save_flags(flags);
1057 cli();
1058
1059 while (count--)
1060 {
1061 if (*str == '\n')
1062 scc_ch_write ('\r');
1063 scc_ch_write (*str++);
1064 }
1065 restore_flags(flags);
1066 }
1067
1068
1069 static int scc_console_wait_key(struct console *co)
1070 {
1071 unsigned long flags;
1072 volatile char *p = NULL;
1073 int c;
1074
1075 #ifdef CONFIG_MVME147_SCC
1076 if (MACH_IS_MVME147)
1077 p = (volatile char *)M147_SCC_A_ADDR;
1078 #endif
1079 #ifdef CONFIG_MVME162_SCC
1080 if (MACH_IS_MVME16x)
1081 p = (volatile char *)MVME_SCC_A_ADDR;
1082 #endif
1083 #ifdef CONFIG_BVME6000_SCC
1084 if (MACH_IS_BVME6000)
1085 p = (volatile char *)BVME_SCC_A_ADDR;
1086 #endif
1087
1088 save_flags(flags);
1089 cli();
1090
1091 /* wait for rx buf filled */
1092 while ((*p & 0x01) == 0)
1093 ;
1094
1095 *p = 8;
1096 scc_delay();
1097 c = *p;
1098 restore_flags(flags);
1099 return c;
1100 }
1101
1102
1103 static kdev_t scc_console_device(struct console *c)
1104 {
1105 return MKDEV(TTY_MAJOR, SCC_MINOR_BASE + c->index);
1106 }
1107
1108
1109 static int __init scc_console_setup(struct console *co, char *options)
1110 {
1111 return 0;
1112 }
1113
1114
1115 static struct console sercons = {
1116 name: "ttyS",
1117 write: scc_console_write,
1118 device: scc_console_device,
1119 wait_key: scc_console_wait_key,
1120 setup: scc_console_setup,
1121 flags: CON_PRINTBUFFER,
1122 index: -1,
1123 };
1124
1125
1126 void __init vme_scc_console_init(void)
1127 {
1128 if (vme_brdtype == VME_TYPE_MVME147 ||
1129 vme_brdtype == VME_TYPE_MVME162 ||
1130 vme_brdtype == VME_TYPE_MVME172 ||
1131 vme_brdtype == VME_TYPE_BVME4000 ||
1132 vme_brdtype == VME_TYPE_BVME6000)
1133 register_console(&sercons);
1134 }
1135
1136
This page was automatically generated by the
LXR engine.
Visit the LXR main site for more
information.