1 #
2 # ISDN device configuration
3 #
4
5 # only included if CONFIG_ISDN != n
6
7 if [ "$CONFIG_INET" != "n" ]; then
8 bool ' Support synchronous PPP' CONFIG_ISDN_PPP
9 if [ "$CONFIG_ISDN_PPP" != "n" ]; then
10 bool ' Use VJ-compression with synchronous PPP' CONFIG_ISDN_PPP_VJ
11 bool ' Support generic MP (RFC 1717)' CONFIG_ISDN_MPP
12 dep_tristate ' Support BSD compression (module only)' CONFIG_ISDN_PPP_BSDCOMP m
13 fi
14 fi
15 bool ' Support audio via ISDN' CONFIG_ISDN_AUDIO
16 if [ "$CONFIG_ISDN_AUDIO" != "n" ]; then
17 bool ' Support AT-Fax Class 1 and 2 commands' CONFIG_ISDN_TTY_FAX
18 fi
19 if [ "$CONFIG_X25" != "n" ]; then
20 bool ' X.25 PLP on top of ISDN' CONFIG_ISDN_X25
21 fi
22
23 mainmenu_option next_comment
24 comment 'ISDN feature submodules'
25 dep_tristate 'isdnloop support' CONFIG_ISDN_DRV_LOOP $CONFIG_ISDN
26 dep_tristate 'Support isdn diversion services' CONFIG_ISDN_DIVERSION $CONFIG_ISDN m
27 endmenu
28
29 comment 'low-level hardware drivers'
30
31 mainmenu_option next_comment
32 comment 'Passive ISDN cards'
33 dep_tristate 'HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
34 if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
35 comment ' D-channel protocol features'
36 bool ' HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
37 if [ "$CONFIG_HISAX_EURO" != "n" ]; then
38 bool ' Support for german chargeinfo' CONFIG_DE_AOC
39 bool ' Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE
40 bool ' Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC
41 bool ' Disable keypad protocol option' CONFIG_HISAX_NO_KEYPAD
42 fi
43 bool ' HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
44 bool ' HiSax Support for US NI1' CONFIG_HISAX_NI1
45 comment ' HiSax supported cards'
46 bool ' Teles 16.0/8.0' CONFIG_HISAX_16_0
47 bool ' Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
48 bool ' Teles PCI' CONFIG_HISAX_TELESPCI
49 bool ' Teles S0Box' CONFIG_HISAX_S0BOX
50 bool ' AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
51 bool ' AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
52 bool ' AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
53 bool ' Elsa cards' CONFIG_HISAX_ELSA
54 bool ' ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
55 bool ' Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
56 bool ' ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM
57 bool ' TELEINT cards' CONFIG_HISAX_TELEINT
58 bool ' HFC-S based cards' CONFIG_HISAX_HFCS
59 bool ' Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
60 bool ' USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
61 bool ' MIC card' CONFIG_HISAX_MIC
62 bool ' NETjet card' CONFIG_HISAX_NETJET
63 bool ' NETspider U card' CONFIG_HISAX_NETJET_U
64 bool ' Niccy PnP/PCI card' CONFIG_HISAX_NICCY
65 bool ' Siemens I-Surf card' CONFIG_HISAX_ISURF
66 bool ' HST Saphir card' CONFIG_HISAX_HSTSAPHIR
67 bool ' Telekom A4T card' CONFIG_HISAX_BKM_A4T
68 bool ' Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
69 bool ' Gazel cards' CONFIG_HISAX_GAZEL
70 bool ' HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
71 bool ' Winbond W6692 based cards' CONFIG_HISAX_W6692
72 if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
73 bool ' HFC-S+, HFC-SP, HFC-PCMCIA cards' CONFIG_HISAX_HFC_SX
74 # bool ' TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
75 if [ "$ARCH" = "sparc" -o "$ARCH" = "sparc64" ]; then
76 bool ' Am7930' CONFIG_HISAX_AMD7930
77 fi
78 fi
79 fi
80 endmenu
81
82 ### Active ISDN cards
83
84 mainmenu_option next_comment
85 comment 'Active ISDN cards'
86
87 dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
88 dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
89 dep_tristate 'Spellcaster support' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
90 dep_tristate 'IBM Active 2000 support' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
91
92 bool 'Eicon active card support' CONFIG_ISDN_DRV_EICON
93 if [ "$CONFIG_ISDN_DRV_EICON" != "n" ]; then
94 if [ "$CONFIG_ISDN_DRV_EICON_OLD" != "y" ]; then
95 dep_tristate ' Build Eicon driver type standalone' CONFIG_ISDN_DRV_EICON_DIVAS $CONFIG_ISDN
96 fi
97 if [ "$CONFIG_ISDN_DRV_EICON_DIVAS" != "y" ]; then
98 dep_tristate ' Legacy Eicon driver' CONFIG_ISDN_DRV_EICON_OLD $CONFIG_ISDN
99 if [ "$CONFIG_ISDN_DRV_EICON_OLD" != "n" ]; then
100 dep_bool ' Eicon PCI DIVA Server BRI/PRI/4BRI support' CONFIG_ISDN_DRV_EICON_PCI $CONFIG_PCI
101 bool ' Eicon S,SX,SCOM,Quadro,S2M support' CONFIG_ISDN_DRV_EICON_ISA
102 fi
103 fi
104 fi
105
106 # CAPI subsystem
107
108 tristate 'CAPI2.0 support' CONFIG_ISDN_CAPI
109 if [ "$CONFIG_ISDN_CAPI" != "n" ]; then
110 bool ' Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
111 dep_bool ' CAPI2.0 Middleware support (EXPERIMENTAL)' CONFIG_ISDN_CAPI_MIDDLEWARE $CONFIG_EXPERIMENTAL
112 dep_tristate ' CAPI2.0 /dev/capi support' CONFIG_ISDN_CAPI_CAPI20 $CONFIG_ISDN_CAPI
113 if [ "$CONFIG_ISDN_CAPI_MIDDLEWARE" = "y" ]; then
114 dep_mbool ' CAPI2.0 filesystem support' CONFIG_ISDN_CAPI_CAPIFS_BOOL $CONFIG_ISDN_CAPI_CAPI20
115 if [ "$CONFIG_ISDN_CAPI_CAPIFS_BOOL" = "y" ]; then
116 define_tristate CONFIG_ISDN_CAPI_CAPIFS $CONFIG_ISDN_CAPI_CAPI20
117 else
118 define_tristate CONFIG_ISDN_CAPI_CAPIFS n
119 fi
120 fi
121 dep_tristate ' CAPI2.0 capidrv interface support' CONFIG_ISDN_CAPI_CAPIDRV $CONFIG_ISDN_CAPI $CONFIG_ISDN
122 fi
123
124 # CAPI drivers
125
126 if [ "$CONFIG_ISDN_CAPI" != "n" ]; then
127 dep_tristate ' AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA $CONFIG_ISDN_CAPI
128 dep_tristate ' AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI
129 dep_mbool ' AVM B1 PCI V4 support' CONFIG_ISDN_DRV_AVMB1_B1PCIV4 $CONFIG_ISDN_DRV_AVMB1_B1PCI
130 dep_tristate ' AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA $CONFIG_ISDN_CAPI
131 dep_tristate ' AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA $CONFIG_ISDN_CAPI $CONFIG_PCMCIA
132 dep_tristate ' AVM B1/M1/M2 PCMCIA cs module' CONFIG_ISDN_DRV_AVMB1_AVM_CS $CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
133 dep_tristate ' AVM T1/T1-B PCI support' CONFIG_ISDN_DRV_AVMB1_T1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI
134 dep_tristate ' AVM C4 support' CONFIG_ISDN_DRV_AVMB1_C4 $CONFIG_ISDN_CAPI $CONFIG_PCI
135 fi
136
137 # HYSDN
138
139 dep_tristate ' Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)' CONFIG_HYSDN m $CONFIG_PROC_FS
140 dep_mbool ' HYSDN CAPI 2.0 support' CONFIG_HYSDN_CAPI $CONFIG_HYSDN $CONFIG_ISDN_CAPI
141 endmenu
This page was automatically generated by the
LXR engine.
Visit the LXR main site for more
information.