1 /* Low-level parallel port routines for the Amiga built-in port
2 *
3 * Author: Joerg Dorchain <joerg@dorchain.net>
4 *
5 * This is a complete rewrite of the code, but based heaviy upon the old
6 * lp_intern. code.
7 *
8 * The built-in Amiga parallel port provides one port at a fixed address
9 * with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status
10 * lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically
11 * in hardware when the data register is accessed), and 1 input control line
12 * /ACK, able to cause an interrupt, but both not directly settable by
13 * software.
14 */
15
16 #include <linux/module.h>
17 #include <linux/init.h>
18 #include <linux/parport.h>
19 #include <linux/ioport.h>
20 #include <asm/setup.h>
21 #include <asm/amigahw.h>
22 #include <asm/irq.h>
23 #include <asm/io.h>
24 #include <asm/amigaints.h>
25
26 #undef DEBUG
27 #ifdef DEBUG
28 #define DPRINTK printk
29 #else
30 #define DPRINTK(x...) do { } while (0)
31 #endif
32
33 static struct parport *this_port = NULL;
34
35 static void amiga_write_data(struct parport *p, unsigned char data)
36 {
37 DPRINTK("write_data %c\n",data);
38 /* Triggers also /STROBE. This behavior cannot be changed */
39 ciaa.prb = data;
40 mb();
41 }
42
43 static unsigned char amiga_read_data(struct parport *p)
44 {
45 /* Triggers also /STROBE. This behavior cannot be changed */
46 return ciaa.prb;
47 }
48
49 #if 0
50 static unsigned char control_pc_to_amiga(unsigned char control)
51 {
52 unsigned char ret = 0;
53
54 if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
55 ;
56 if (control & PARPORT_CONTROL_INIT) /* INITP */
57 /* reset connected to cpu reset pin */;
58 if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
59 /* Not connected */;
60 if (control & PARPORT_CONTROL_STROBE) /* Strobe */
61 /* Handled only directly by hardware */;
62 return ret;
63 }
64 #endif
65
66 static unsigned char control_amiga_to_pc(unsigned char control)
67 {
68 return PARPORT_CONTROL_SELECT |
69 PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE;
70 /* fake value: interrupt enable, select in, no reset,
71 no autolf, no strobe - seems to be closest the wiring diagram */
72 }
73
74 static void amiga_write_control(struct parport *p, unsigned char control)
75 {
76 DPRINTK("write_control %02x\n",control);
77 /* No implementation possible */
78 }
79
80 static unsigned char amiga_read_control( struct parport *p)
81 {
82 DPRINTK("read_control \n");
83 return control_amiga_to_pc(0);
84 }
85
86 static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val)
87 {
88 unsigned char old;
89
90 DPRINTK("frob_control mask %02x, value %02x\n",mask,val);
91 old = amiga_read_control(p);
92 amiga_write_control(p, (old & ~mask) ^ val);
93 return old;
94 }
95
96 #if 0 /* currently unused */
97 static unsigned char status_pc_to_amiga(unsigned char status)
98 {
99 unsigned char ret = 1;
100
101 if (status & PARPORT_STATUS_BUSY) /* Busy */
102 ret &= ~1;
103 if (status & PARPORT_STATUS_ACK) /* Ack */
104 /* handled in hardware */;
105 if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
106 ret |= 2;
107 if (status & PARPORT_STATUS_SELECT) /* select */
108 ret |= 4;
109 if (status & PARPORT_STATUS_ERROR) /* error */
110 /* not connected */;
111 return ret;
112 }
113 #endif
114
115 static unsigned char status_amiga_to_pc(unsigned char status)
116 {
117 unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
118
119 if (status & 1) /* Busy */
120 ret &= ~PARPORT_STATUS_BUSY;
121 if (status & 2) /* PaperOut */
122 ret |= PARPORT_STATUS_PAPEROUT;
123 if (status & 4) /* Selected */
124 ret |= PARPORT_STATUS_SELECT;
125 /* the rest is not connected or handled autonomously in hardware */
126
127 return ret;
128 }
129
130 static unsigned char amiga_read_status(struct parport *p)
131 {
132 unsigned char status;
133
134 status = status_amiga_to_pc(ciab.pra & 7);
135 DPRINTK("read_status %02x\n", status);
136 return status;
137 }
138
139 /* as this ports irq handling is already done, we use a generic funktion */
140 static void amiga_interrupt(int irq, void *dev_id, struct pt_regs *regs)
141 {
142 parport_generic_irq(irq, (struct parport *) dev_id, regs);
143 }
144
145 static void amiga_enable_irq(struct parport *p)
146 {
147 enable_irq(IRQ_AMIGA_CIAA_FLG);
148 }
149
150 static void amiga_disable_irq(struct parport *p)
151 {
152 disable_irq(IRQ_AMIGA_CIAA_FLG);
153 }
154
155 static void amiga_data_forward(struct parport *p)
156 {
157 DPRINTK("forward\n");
158 ciaa.ddrb = 0xff; /* all pins output */
159 mb();
160 }
161
162 static void amiga_data_reverse(struct parport *p)
163 {
164 DPRINTK("reverse\n");
165 ciaa.ddrb = 0; /* all pins input */
166 mb();
167 }
168
169 static void amiga_init_state(struct pardevice *dev, struct parport_state *s)
170 {
171 s->u.amiga.data = 0;
172 s->u.amiga.datadir = 255;
173 s->u.amiga.status = 0;
174 s->u.amiga.statusdir = 0;
175 }
176
177 static void amiga_save_state(struct parport *p, struct parport_state *s)
178 {
179 mb();
180 s->u.amiga.data = ciaa.prb;
181 s->u.amiga.datadir = ciaa.ddrb;
182 s->u.amiga.status = ciab.pra & 7;
183 s->u.amiga.statusdir = ciab.ddra & 7;
184 mb();
185 }
186
187 static void amiga_restore_state(struct parport *p, struct parport_state *s)
188 {
189 mb();
190 ciaa.prb = s->u.amiga.data;
191 ciaa.ddrb = s->u.amiga.datadir;
192 ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status;
193 ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir;
194 mb();
195 }
196
197 static void amiga_inc_use_count(void)
198 {
199 MOD_INC_USE_COUNT;
200 }
201
202 static void amiga_dec_use_count(void)
203 {
204 MOD_DEC_USE_COUNT;
205 }
206
207 static struct parport_operations pp_amiga_ops = {
208 amiga_write_data,
209 amiga_read_data,
210
211 amiga_write_control,
212 amiga_read_control,
213 amiga_frob_control,
214
215 amiga_read_status,
216
217 amiga_enable_irq,
218 amiga_disable_irq,
219
220 amiga_data_forward,
221 amiga_data_reverse,
222
223 amiga_init_state,
224 amiga_save_state,
225 amiga_restore_state,
226
227 amiga_inc_use_count,
228 amiga_dec_use_count,
229
230 parport_ieee1284_epp_write_data,
231 parport_ieee1284_epp_read_data,
232 parport_ieee1284_epp_write_addr,
233 parport_ieee1284_epp_read_addr,
234
235 parport_ieee1284_ecp_write_data,
236 parport_ieee1284_ecp_read_data,
237 parport_ieee1284_ecp_write_addr,
238
239 parport_ieee1284_write_compat,
240 parport_ieee1284_read_nibble,
241 parport_ieee1284_read_byte,
242 };
243
244 /* ----------- Initialisation code --------------------------------- */
245
246 int __init parport_amiga_init(void)
247 {
248 struct parport *p;
249 int err;
250
251 if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_PARALLEL))
252 return -ENODEV;
253
254 err = -EBUSY;
255 if (!request_mem_region(CIAA_PHYSADDR-1+0x100, 0x100, "parallel"))
256 goto out_mem;
257
258 ciaa.ddrb = 0xff;
259 ciab.ddra &= 0xf8;
260 mb();
261
262 p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
263 PARPORT_DMA_NONE, &pp_amiga_ops);
264 if (!p)
265 goto out_port;
266
267 err = request_irq(IRQ_AMIGA_CIAA_FLG, amiga_interrupt, 0, p->name, p);
268 if (err)
269 goto out_irq;
270
271 this_port = p;
272 printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
273 /* XXX: set operating mode */
274 parport_proc_register(p);
275
276 parport_announce_port(p);
277
278 return 0;
279
280 out_irq:
281 parport_unregister_port(p);
282 out_port:
283 release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
284 out_mem:
285 return err;
286 }
287
288 void __exit parport_amiga_exit(void)
289 {
290 if (this_port->irq != PARPORT_IRQ_NONE)
291 free_irq(IRQ_AMIGA_CIAA_FLG, this_port);
292 parport_proc_unregister(this_port);
293 parport_unregister_port(this_port);
294 release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
295 }
296
297
298 MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
299 MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
300 MODULE_SUPPORTED_DEVICE("Amiga builtin Parallel Port");
301
302 module_init(parport_amiga_init)
303 module_exit(parport_amiga_exit)
304
This page was automatically generated by the
LXR engine.
Visit the LXR main site for more
information.