1 /* pluto.h: SparcSTORAGE Array SCSI host adapter driver definitions.
2 *
3 * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
4 */
5
6 #ifndef _PLUTO_H
7 #define _PLUTO_H
8
9 #include "../fc4/fcp_impl.h"
10
11 struct pluto {
12 /* This must be first */
13 fc_channel *fc;
14 char rev_str[5];
15 char fw_rev_str[5];
16 char serial_str[13];
17 };
18
19 struct pluto_inquiry {
20 u8 dtype;
21 u8 removable:1, qualifier:7;
22 u8 iso:2, ecma:3, ansi:3;
23 u8 aenc:1, trmiop:1, :2, rdf:4;
24 u8 len;
25 u8 xxx1;
26 u8 xxx2;
27 u8 reladdr:1, wbus32:1, wbus16:1, sync:1, linked:1, :1, cmdque:1, softreset:1;
28 u8 vendor_id[8];
29 u8 product_id[16];
30 u8 revision[4];
31 u8 fw_revision[4];
32 u8 serial[12];
33 u8 xxx3[2];
34 u8 channels;
35 u8 targets;
36 };
37
38 /* This is the max number of outstanding SCSI commands per pluto */
39 #define PLUTO_CAN_QUEUE 254
40
41 int pluto_detect(Scsi_Host_Template *);
42 int pluto_release(struct Scsi_Host *);
43 const char * pluto_info(struct Scsi_Host *);
44
45 #define PLUTO { \
46 name: "Sparc Storage Array 100/200", \
47 detect: pluto_detect, \
48 release: pluto_release, \
49 info: pluto_info, \
50 queuecommand: fcp_scsi_queuecommand, \
51 can_queue: PLUTO_CAN_QUEUE, \
52 this_id: -1, \
53 sg_tablesize: 1, \
54 cmd_per_lun: 1, \
55 use_clustering: ENABLE_CLUSTERING, \
56 use_new_eh_code: FCP_SCSI_USE_NEW_EH_CODE, \
57 abort: fcp_old_abort, \
58 eh_abort_handler: fcp_scsi_abort, \
59 eh_device_reset_handler:fcp_scsi_dev_reset, \
60 eh_bus_reset_handler: fcp_scsi_bus_reset, \
61 eh_host_reset_handler: fcp_scsi_host_reset, \
62 }
63
64 #endif /* !(_PLUTO_H) */
65
66
This page was automatically generated by the
LXR engine.
Visit the LXR main site for more
information.