1 /*
2 * QLogic ISP1020 Intelligent SCSI Processor Driver (PCI)
3 * Written by Erik H. Moe, ehm@cris.com
4 * Copyright 1995, Erik H. Moe
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2, or (at your option) any
9 * later version.
10 *
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
15 */
16
17 /* Renamed and updated to 1.3.x by Michael Griffith <grif@cs.ucr.edu> */
18
19 /*
20 * $Date: 1995/09/22 02:32:56 $
21 * $Revision: 0.5 $
22 *
23 * $Log: isp1020.h,v $
24 * Revision 0.5 1995/09/22 02:32:56 root
25 * do auto request sense
26 *
27 * Revision 0.4 1995/08/07 04:48:28 root
28 * supply firmware with driver.
29 * numerous bug fixes/general cleanup of code.
30 *
31 * Revision 0.3 1995/07/16 16:17:16 root
32 * added reset/abort code.
33 *
34 * Revision 0.2 1995/06/29 03:19:43 root
35 * fixed biosparam.
36 * added queue protocol.
37 *
38 * Revision 0.1 1995/06/25 01:56:13 root
39 * Initial release.
40 *
41 */
42
43 #ifndef _QLOGICISP_H
44 #define _QLOGICISP_H
45
46 /*
47 * With the qlogic interface, every queue slot can hold a SCSI
48 * command with up to 4 scatter/gather entries. If we need more
49 * than 4 entries, continuation entries can be used that hold
50 * another 7 entries each. Unlike for other drivers, this means
51 * that the maximum number of scatter/gather entries we can
52 * support at any given time is a function of the number of queue
53 * slots available. That is, host->can_queue and host->sg_tablesize
54 * are dynamic and _not_ independent. This all works fine because
55 * requests are queued serially and the scatter/gather limit is
56 * determined for each queue request anew.
57 */
58 #define QLOGICISP_REQ_QUEUE_LEN 63 /* must be power of two - 1 */
59 #define QLOGICISP_MAX_SG(ql) (4 + ((ql) > 0) ? 7*((ql) - 1) : 0)
60
61 int isp1020_detect(Scsi_Host_Template *);
62 int isp1020_release(struct Scsi_Host *);
63 const char * isp1020_info(struct Scsi_Host *);
64 int isp1020_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
65 int isp1020_abort(Scsi_Cmnd *);
66 int isp1020_reset(Scsi_Cmnd *, unsigned int);
67 int isp1020_biosparam(Disk *, kdev_t, int[]);
68
69 #ifndef NULL
70 #define NULL (0)
71 #endif
72
73 #define QLOGICISP { \
74 detect: isp1020_detect, \
75 release: isp1020_release, \
76 info: isp1020_info, \
77 queuecommand: isp1020_queuecommand, \
78 abort: isp1020_abort, \
79 reset: isp1020_reset, \
80 bios_param: isp1020_biosparam, \
81 can_queue: QLOGICISP_REQ_QUEUE_LEN, \
82 this_id: -1, \
83 sg_tablesize: QLOGICISP_MAX_SG(QLOGICISP_REQ_QUEUE_LEN), \
84 cmd_per_lun: 1, \
85 present: 0, \
86 unchecked_isa_dma: 0, \
87 use_clustering: DISABLE_CLUSTERING \
88 }
89
90 #endif /* _QLOGICISP_H */
91
This page was automatically generated by the
LXR engine.
Visit the LXR main site for more
information.