1 #ifndef __ALPHA_JENSEN_H
2 #define __ALPHA_JENSEN_H
3
4 #include <asm/compiler.h>
5
6 /*
7 * Defines for the AlphaPC EISA IO and memory address space.
8 */
9
10 /* The Jensen is strange */
11 #define AUX_IRQ (9)
12
13 /*
14 * NOTE! The memory operations do not set any memory barriers, as it's
15 * not needed for cases like a frame buffer that is essentially memory-like.
16 * You need to do them by hand if the operations depend on ordering.
17 *
18 * Similarly, the port IO operations do a "mb" only after a write operation:
19 * if an mb is needed before (as in the case of doing memory mapped IO
20 * first, and then a port IO operation to the same device), it needs to be
21 * done by hand.
22 *
23 * After the above has bitten me 100 times, I'll give up and just do the
24 * mb all the time, but right now I'm hoping this will work out. Avoiding
25 * mb's may potentially be a noticeable speed improvement, but I can't
26 * honestly say I've tested it.
27 *
28 * Handling interrupts that need to do mb's to synchronize to non-interrupts
29 * is another fun race area. Don't do it (because if you do, I'll have to
30 * do *everything* with interrupts disabled, ugh).
31 */
32
33 /*
34 * EISA Interrupt Acknowledge address
35 */
36 #define EISA_INTA (IDENT_ADDR + 0x100000000UL)
37
38 /*
39 * FEPROM addresses
40 */
41 #define EISA_FEPROM0 (IDENT_ADDR + 0x180000000UL)
42 #define EISA_FEPROM1 (IDENT_ADDR + 0x1A0000000UL)
43
44 /*
45 * VL82C106 base address
46 */
47 #define EISA_VL82C106 (IDENT_ADDR + 0x1C0000000UL)
48
49 /*
50 * EISA "Host Address Extension" address (bits 25-31 of the EISA address)
51 */
52 #define EISA_HAE (IDENT_ADDR + 0x1D0000000UL)
53
54 /*
55 * "SYSCTL" register address
56 */
57 #define EISA_SYSCTL (IDENT_ADDR + 0x1E0000000UL)
58
59 /*
60 * "spare" register address
61 */
62 #define EISA_SPARE (IDENT_ADDR + 0x1F0000000UL)
63
64 /*
65 * EISA memory address offset
66 */
67 #define EISA_MEM (IDENT_ADDR + 0x200000000UL)
68
69 /*
70 * EISA IO address offset
71 */
72 #define EISA_IO (IDENT_ADDR + 0x300000000UL)
73
74
75 #ifdef __KERNEL__
76
77 #ifndef __EXTERN_INLINE
78 #define __EXTERN_INLINE extern inline
79 #define __IO_EXTERN_INLINE
80 #endif
81
82 /*
83 * Handle the "host address register". This needs to be set
84 * to the high 7 bits of the EISA address. This is also needed
85 * for EISA IO addresses, which are only 16 bits wide (the
86 * hae needs to be set to 0).
87 *
88 * HAE isn't needed for the local IO operations, though.
89 */
90
91 #define JENSEN_HAE_ADDRESS EISA_HAE
92 #define JENSEN_HAE_MASK 0x1ffffff
93
94 __EXTERN_INLINE void jensen_set_hae(unsigned long addr)
95 {
96 /* hae on the Jensen is bits 31:25 shifted right */
97 addr >>= 25;
98 if (addr != alpha_mv.hae_cache)
99 set_hae(addr);
100 }
101
102 #define vuip volatile unsigned int *
103
104 /*
105 * IO functions
106 *
107 * The "local" functions are those that don't go out to the EISA bus,
108 * but instead act on the VL82C106 chip directly.. This is mainly the
109 * keyboard, RTC, printer and first two serial lines..
110 *
111 * The local stuff makes for some complications, but it seems to be
112 * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H
113 * convinced that I need one of the newer machines.
114 */
115
116 static inline unsigned int jensen_local_inb(unsigned long addr)
117 {
118 return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
119 }
120
121 static inline void jensen_local_outb(unsigned char b, unsigned long addr)
122 {
123 *(vuip)((addr << 9) + EISA_VL82C106) = b;
124 mb();
125 }
126
127 static inline unsigned int jensen_bus_inb(unsigned long addr)
128 {
129 long result;
130
131 jensen_set_hae(0);
132 result = *(volatile int *)((addr << 7) + EISA_IO + 0x00);
133 return __kernel_extbl(result, addr & 3);
134 }
135
136 static inline void jensen_bus_outb(unsigned char b, unsigned long addr)
137 {
138 jensen_set_hae(0);
139 *(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;
140 mb();
141 }
142
143 /*
144 * It seems gcc is not very good at optimizing away logical
145 * operations that result in operations across inline functions.
146 * Which is why this is a macro.
147 */
148
149 #define jensen_is_local(addr) ( \
150 /* keyboard */ (addr == 0x60 || addr == 0x64) || \
151 /* RTC */ (addr == 0x170 || addr == 0x171) || \
152 /* mb COM2 */ (addr >= 0x2f8 && addr <= 0x2ff) || \
153 /* mb LPT1 */ (addr >= 0x3bc && addr <= 0x3be) || \
154 /* mb COM2 */ (addr >= 0x3f8 && addr <= 0x3ff))
155
156 __EXTERN_INLINE unsigned int jensen_inb(unsigned long addr)
157 {
158 if (jensen_is_local(addr))
159 return jensen_local_inb(addr);
160 else
161 return jensen_bus_inb(addr);
162 }
163
164 __EXTERN_INLINE void jensen_outb(unsigned char b, unsigned long addr)
165 {
166 if (jensen_is_local(addr))
167 jensen_local_outb(b, addr);
168 else
169 jensen_bus_outb(b, addr);
170 }
171
172 __EXTERN_INLINE unsigned int jensen_inw(unsigned long addr)
173 {
174 long result;
175
176 jensen_set_hae(0);
177 result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20);
178 result >>= (addr & 3) * 8;
179 return 0xffffUL & result;
180 }
181
182 __EXTERN_INLINE unsigned int jensen_inl(unsigned long addr)
183 {
184 jensen_set_hae(0);
185 return *(vuip) ((addr << 7) + EISA_IO + 0x60);
186 }
187
188 __EXTERN_INLINE void jensen_outw(unsigned short b, unsigned long addr)
189 {
190 jensen_set_hae(0);
191 *(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001;
192 mb();
193 }
194
195 __EXTERN_INLINE void jensen_outl(unsigned int b, unsigned long addr)
196 {
197 jensen_set_hae(0);
198 *(vuip) ((addr << 7) + EISA_IO + 0x60) = b;
199 mb();
200 }
201
202 /*
203 * Memory functions.
204 */
205
206 __EXTERN_INLINE unsigned long jensen_readb(unsigned long addr)
207 {
208 long result;
209
210 jensen_set_hae(addr);
211 addr &= JENSEN_HAE_MASK;
212 result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00);
213 result >>= (addr & 3) * 8;
214 return 0xffUL & result;
215 }
216
217 __EXTERN_INLINE unsigned long jensen_readw(unsigned long addr)
218 {
219 long result;
220
221 jensen_set_hae(addr);
222 addr &= JENSEN_HAE_MASK;
223 result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20);
224 result >>= (addr & 3) * 8;
225 return 0xffffUL & result;
226 }
227
228 __EXTERN_INLINE unsigned long jensen_readl(unsigned long addr)
229 {
230 jensen_set_hae(addr);
231 addr &= JENSEN_HAE_MASK;
232 return *(vuip) ((addr << 7) + EISA_MEM + 0x60);
233 }
234
235 __EXTERN_INLINE unsigned long jensen_readq(unsigned long addr)
236 {
237 unsigned long r0, r1;
238
239 jensen_set_hae(addr);
240 addr &= JENSEN_HAE_MASK;
241 addr = (addr << 7) + EISA_MEM + 0x60;
242 r0 = *(vuip) (addr);
243 r1 = *(vuip) (addr + (4 << 7));
244 return r1 << 32 | r0;
245 }
246
247 __EXTERN_INLINE void jensen_writeb(unsigned char b, unsigned long addr)
248 {
249 jensen_set_hae(addr);
250 addr &= JENSEN_HAE_MASK;
251 *(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101;
252 }
253
254 __EXTERN_INLINE void jensen_writew(unsigned short b, unsigned long addr)
255 {
256 jensen_set_hae(addr);
257 addr &= JENSEN_HAE_MASK;
258 *(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001;
259 }
260
261 __EXTERN_INLINE void jensen_writel(unsigned int b, unsigned long addr)
262 {
263 jensen_set_hae(addr);
264 addr &= JENSEN_HAE_MASK;
265 *(vuip) ((addr << 7) + EISA_MEM + 0x60) = b;
266 }
267
268 __EXTERN_INLINE void jensen_writeq(unsigned long b, unsigned long addr)
269 {
270 jensen_set_hae(addr);
271 addr &= JENSEN_HAE_MASK;
272 addr = (addr << 7) + EISA_MEM + 0x60;
273 *(vuip) (addr) = b;
274 *(vuip) (addr + (4 << 7)) = b >> 32;
275 }
276
277 __EXTERN_INLINE unsigned long jensen_ioremap(unsigned long addr)
278 {
279 return addr;
280 }
281
282 __EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr)
283 {
284 return (long)addr >= 0;
285 }
286
287 #undef vuip
288
289 #ifdef __WANT_IO_DEF
290
291 #define __inb jensen_inb
292 #define __inw jensen_inw
293 #define __inl jensen_inl
294 #define __outb jensen_outb
295 #define __outw jensen_outw
296 #define __outl jensen_outl
297 #define __readb jensen_readb
298 #define __readw jensen_readw
299 #define __writeb jensen_writeb
300 #define __writew jensen_writew
301 #define __readl jensen_readl
302 #define __readq jensen_readq
303 #define __writel jensen_writel
304 #define __writeq jensen_writeq
305 #define __ioremap jensen_ioremap
306 #define __is_ioaddr jensen_is_ioaddr
307
308 /*
309 * The above have so much overhead that it probably doesn't make
310 * sense to have them inlined (better icache behaviour).
311 */
312 #define inb(port) \
313 (__builtin_constant_p((port))?__inb(port):_inb(port))
314
315 #define outb(x, port) \
316 (__builtin_constant_p((port))?__outb((x),(port)):_outb((x),(port)))
317
318 #endif /* __WANT_IO_DEF */
319
320 #ifdef __IO_EXTERN_INLINE
321 #undef __EXTERN_INLINE
322 #undef __IO_EXTERN_INLINE
323 #endif
324
325 #endif /* __KERNEL__ */
326
327 #endif /* __ALPHA_JENSEN_H */
328
This page was automatically generated by the
LXR engine.
Visit the LXR main site for more
information.