1 /* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
2 * linux/include/linux/cyclades.h
3 *
4 * This file was initially written by
5 * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
6 * Ivan Passos <ivan@cyclades.com>.
7 *
8 * This file contains the general definitions for the cyclades.c driver
9 *$Log: cyclades.h,v $
10 *Revision 3.1 2000/04/19 18:52:52 ivan
11 *converted address fields to unsigned long and added fields for physical
12 *addresses on cyclades_card structure;
13 *
14 *Revision 3.0 1998/11/02 14:20:59 ivan
15 *added nports field on cyclades_card structure;
16 *
17 *Revision 2.5 1998/08/03 16:57:01 ivan
18 *added cyclades_idle_stats structure;
19 *
20 *Revision 2.4 1998/06/01 12:09:53 ivan
21 *removed closing_wait2 from cyclades_port structure;
22 *
23 *Revision 2.3 1998/03/16 18:01:12 ivan
24 *changes in the cyclades_port structure to get it closer to the
25 *standard serial port structure;
26 *added constants for new ioctls;
27 *
28 *Revision 2.2 1998/02/17 16:50:00 ivan
29 *changes in the cyclades_port structure (addition of shutdown_wait and
30 *chip_rev variables);
31 *added constants for new ioctls and for CD1400 rev. numbers.
32 *
33 *Revision 2.1 1997/10/24 16:03:00 ivan
34 *added rflow (which allows enabling the CD1400 special flow control
35 *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to
36 *cyclades_port structure;
37 *added Alpha support
38 *
39 *Revision 2.0 1997/06/30 10:30:00 ivan
40 *added some new doorbell command constants related to IOCTLW and
41 *UART error signaling
42 *
43 *Revision 1.8 1997/06/03 15:30:00 ivan
44 *added constant ZFIRM_HLT
45 *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
46 *
47 *Revision 1.7 1997/03/26 10:30:00 daniel
48 *new entries at the end of cyclades_port struct to reallocate
49 *variables illegally allocated within card memory.
50 *
51 *Revision 1.6 1996/09/09 18:35:30 bentson
52 *fold in changes for Cyclom-Z -- including structures for
53 *communicating with board as well modest changes to original
54 *structures to support new features.
55 *
56 *Revision 1.5 1995/11/13 21:13:31 bentson
57 *changes suggested by Michael Chastain <mec@duracef.shout.net>
58 *to support use of this file in non-kernel applications
59 *
60 *
61 */
62
63 #ifndef _LINUX_CYCLADES_H
64 #define _LINUX_CYCLADES_H
65
66 struct cyclades_monitor {
67 unsigned long int_count;
68 unsigned long char_count;
69 unsigned long char_max;
70 unsigned long char_last;
71 };
72
73 /*
74 * These stats all reflect activity since the device was last initialized.
75 * (i.e., since the port was opened with no other processes already having it
76 * open)
77 */
78 struct cyclades_idle_stats {
79 time_t in_use; /* Time device has been in use (secs) */
80 time_t recv_idle; /* Time since last char received (secs) */
81 time_t xmit_idle; /* Time since last char transmitted (secs) */
82 unsigned long recv_bytes; /* Bytes received */
83 unsigned long xmit_bytes; /* Bytes transmitted */
84 unsigned long overruns; /* Input overruns */
85 unsigned long frame_errs; /* Input framing errors */
86 unsigned long parity_errs; /* Input parity errors */
87 };
88
89 #define CYCLADES_MAGIC 0x4359
90
91 #define CYGETMON 0x435901
92 #define CYGETTHRESH 0x435902
93 #define CYSETTHRESH 0x435903
94 #define CYGETDEFTHRESH 0x435904
95 #define CYSETDEFTHRESH 0x435905
96 #define CYGETTIMEOUT 0x435906
97 #define CYSETTIMEOUT 0x435907
98 #define CYGETDEFTIMEOUT 0x435908
99 #define CYSETDEFTIMEOUT 0x435909
100 #define CYSETRFLOW 0x43590a
101 #define CYGETRFLOW 0x43590b
102 #define CYSETRTSDTR_INV 0x43590c
103 #define CYGETRTSDTR_INV 0x43590d
104 #define CYZSETPOLLCYCLE 0x43590e
105 #define CYZGETPOLLCYCLE 0x43590f
106 #define CYGETCD1400VER 0x435910
107 #define CYGETCARDINFO 0x435911
108 #define CYSETWAIT 0x435912
109 #define CYGETWAIT 0x435913
110
111 /*************** CYCLOM-Z ADDITIONS ***************/
112
113 #define CZIOC ('M' << 8)
114 #define CZ_NBOARDS (CZIOC|0xfa)
115 #define CZ_BOOT_START (CZIOC|0xfb)
116 #define CZ_BOOT_DATA (CZIOC|0xfc)
117 #define CZ_BOOT_END (CZIOC|0xfd)
118 #define CZ_TEST (CZIOC|0xfe)
119
120 #define CZ_DEF_POLL (HZ/25)
121
122 #define MAX_BOARD 4 /* Max number of boards */
123 #define MAX_DEV 256 /* Max number of ports total */
124 #define CYZ_MAX_SPEED 921600
125
126 #define CYZ_FIFO_SIZE 16
127
128 #define CYZ_BOOT_NWORDS 0x100
129 struct CYZ_BOOT_CTRL {
130 unsigned short nboard;
131 int status[MAX_BOARD];
132 int nchannel[MAX_BOARD];
133 int fw_rev[MAX_BOARD];
134 unsigned long offset;
135 unsigned long data[CYZ_BOOT_NWORDS];
136 };
137
138
139 #ifndef DP_WINDOW_SIZE
140 /* #include "cyclomz.h" */
141 /****************** ****************** *******************/
142 /*
143 * The data types defined below are used in all ZFIRM interface
144 * data structures. They accomodate differences between HW
145 * architectures and compilers.
146 */
147
148 #if defined(__alpha__)
149 typedef unsigned long ucdouble; /* 64 bits, unsigned */
150 typedef unsigned int uclong; /* 32 bits, unsigned */
151 #else
152 typedef unsigned long uclong; /* 32 bits, unsigned */
153 #endif
154 typedef unsigned short ucshort; /* 16 bits, unsigned */
155 typedef unsigned char ucchar; /* 8 bits, unsigned */
156
157 /*
158 * Memory Window Sizes
159 */
160
161 #define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
162 #define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
163 8Zo V.2 */
164 #define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
165
166 /*
167 * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
168 * normally will access only interested on the fpga_id, fpga_version,
169 * start_cpu and stop_cpu.
170 */
171
172 struct CUSTOM_REG {
173 uclong fpga_id; /* FPGA Identification Register */
174 uclong fpga_version; /* FPGA Version Number Register */
175 uclong cpu_start; /* CPU start Register (write) */
176 uclong cpu_stop; /* CPU stop Register (write) */
177 uclong misc_reg; /* Miscelaneous Register */
178 uclong idt_mode; /* IDT mode Register */
179 uclong uart_irq_status; /* UART IRQ status Register */
180 uclong clear_timer0_irq; /* Clear timer interrupt Register */
181 uclong clear_timer1_irq; /* Clear timer interrupt Register */
182 uclong clear_timer2_irq; /* Clear timer interrupt Register */
183 uclong test_register; /* Test Register */
184 uclong test_count; /* Test Count Register */
185 uclong timer_select; /* Timer select register */
186 uclong pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
187 uclong ram_wait_state; /* RAM wait-state Register */
188 uclong uart_wait_state; /* UART wait-state Register */
189 uclong timer_wait_state; /* timer wait-state Register */
190 uclong ack_wait_state; /* ACK wait State Register */
191 };
192
193 /*
194 * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
195 * registers. This structure can be used to access the 9060 registers
196 * (memory mapped).
197 */
198
199 struct RUNTIME_9060 {
200 uclong loc_addr_range; /* 00h - Local Address Range */
201 uclong loc_addr_base; /* 04h - Local Address Base */
202 uclong loc_arbitr; /* 08h - Local Arbitration */
203 uclong endian_descr; /* 0Ch - Big/Little Endian Descriptor */
204 uclong loc_rom_range; /* 10h - Local ROM Range */
205 uclong loc_rom_base; /* 14h - Local ROM Base */
206 uclong loc_bus_descr; /* 18h - Local Bus descriptor */
207 uclong loc_range_mst; /* 1Ch - Local Range for Master to PCI */
208 uclong loc_base_mst; /* 20h - Local Base for Master PCI */
209 uclong loc_range_io; /* 24h - Local Range for Master IO */
210 uclong pci_base_mst; /* 28h - PCI Base for Master PCI */
211 uclong pci_conf_io; /* 2Ch - PCI configuration for Master IO */
212 uclong filler1; /* 30h */
213 uclong filler2; /* 34h */
214 uclong filler3; /* 38h */
215 uclong filler4; /* 3Ch */
216 uclong mail_box_0; /* 40h - Mail Box 0 */
217 uclong mail_box_1; /* 44h - Mail Box 1 */
218 uclong mail_box_2; /* 48h - Mail Box 2 */
219 uclong mail_box_3; /* 4Ch - Mail Box 3 */
220 uclong filler5; /* 50h */
221 uclong filler6; /* 54h */
222 uclong filler7; /* 58h */
223 uclong filler8; /* 5Ch */
224 uclong pci_doorbell; /* 60h - PCI to Local Doorbell */
225 uclong loc_doorbell; /* 64h - Local to PCI Doorbell */
226 uclong intr_ctrl_stat; /* 68h - Interrupt Control/Status */
227 uclong init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
228 };
229
230 /* Values for the Local Base Address re-map register */
231
232 #define WIN_RAM 0x00000001L /* set the sliding window to RAM */
233 #define WIN_CREG 0x14000001L /* set the window to custom Registers */
234
235 /* Values timer select registers */
236
237 #define TIMER_BY_1M 0x00 /* clock divided by 1M */
238 #define TIMER_BY_256K 0x01 /* clock divided by 256k */
239 #define TIMER_BY_128K 0x02 /* clock divided by 128k */
240 #define TIMER_BY_32K 0x03 /* clock divided by 32k */
241
242 /****************** ****************** *******************/
243 #endif
244
245 #ifndef ZFIRM_ID
246 /* #include "zfwint.h" */
247 /****************** ****************** *******************/
248 /*
249 * This file contains the definitions for interfacing with the
250 * Cyclom-Z ZFIRM Firmware.
251 */
252
253 /* General Constant definitions */
254
255 #define MAX_CHAN 64 /* max number of channels per board */
256
257 /* firmware id structure (set after boot) */
258
259 #define ID_ADDRESS 0x00000180L /* signature/pointer address */
260 #define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
261 #define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
262 #define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
263
264 #define ZF_TINACT_DEF 1000 /* default inactivity timeout
265 (1000 ms) */
266 #define ZF_TINACT ZF_TINACT_DEF
267
268 struct FIRM_ID {
269 uclong signature; /* ZFIRM/U signature */
270 uclong zfwctrl_addr; /* pointer to ZFW_CTRL structure */
271 };
272
273 /* Op. System id */
274
275 #define C_OS_LINUX 0x00000030 /* generic Linux system */
276
277 /* channel op_mode */
278
279 #define C_CH_DISABLE 0x00000000 /* channel is disabled */
280 #define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
281 #define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
282 #define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
283 #define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
284
285 /* comm_parity - parity */
286
287 #define C_PR_NONE 0x00000000 /* None */
288 #define C_PR_ODD 0x00000001 /* Odd */
289 #define C_PR_EVEN 0x00000002 /* Even */
290 #define C_PR_MARK 0x00000004 /* Mark */
291 #define C_PR_SPACE 0x00000008 /* Space */
292 #define C_PR_PARITY 0x000000ff
293
294 #define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
295 #define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
296
297 /* comm_data_l - data length and stop bits */
298
299 #define C_DL_CS5 0x00000001
300 #define C_DL_CS6 0x00000002
301 #define C_DL_CS7 0x00000004
302 #define C_DL_CS8 0x00000008
303 #define C_DL_CS 0x0000000f
304 #define C_DL_1STOP 0x00000010
305 #define C_DL_15STOP 0x00000020
306 #define C_DL_2STOP 0x00000040
307 #define C_DL_STOP 0x000000f0
308
309 /* interrupt enabling/status */
310
311 #define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
312 #define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
313 #define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
314 #define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
315 #define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
316 #define C_IN_MDCD 0x00000100 /* modem DCD change */
317 #define C_IN_MDSR 0x00000200 /* modem DSR change */
318 #define C_IN_MRI 0x00000400 /* modem RI change */
319 #define C_IN_MCTS 0x00000800 /* modem CTS change */
320 #define C_IN_RXBRK 0x00001000 /* Break received */
321 #define C_IN_PR_ERROR 0x00002000 /* parity error */
322 #define C_IN_FR_ERROR 0x00004000 /* frame error */
323 #define C_IN_OVR_ERROR 0x00008000 /* overrun error */
324 #define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
325 #define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
326 #define C_IN_MRTS 0x00040000 /* modem RTS drop */
327 #define C_IN_ICHAR 0x00080000
328
329 /* flow control */
330
331 #define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
332 #define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
333 #define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
334 #define C_FL_SWFLOW 0x0000000f
335
336 /* flow status */
337
338 #define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
339 #define C_FS_SENDING 0x00000001 /* UART is sending data */
340 #define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
341
342 /* rs_control/rs_status RS-232 signals */
343
344 #define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
345 IOCTLM command */
346 #define C_RS_RTS 0x00000001 /* RTS */
347 #define C_RS_DTR 0x00000004 /* DTR */
348 #define C_RS_DCD 0x00000100 /* CD */
349 #define C_RS_DSR 0x00000200 /* DSR */
350 #define C_RS_RI 0x00000400 /* RI */
351 #define C_RS_CTS 0x00000800 /* CTS */
352
353 /* commands Host <-> Board */
354
355 #define C_CM_RESET 0x01 /* reset/flush buffers */
356 #define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
357 #define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
358 #define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
359 #define C_CM_SENDXOFF 0x10 /* send Xoff */
360 #define C_CM_SENDXON 0x11 /* send Xon */
361 #define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
362 #define C_CM_SENDBRK 0x41 /* send break */
363 #define C_CM_INTBACK 0x42 /* Interrupt back */
364 #define C_CM_SET_BREAK 0x43 /* Tx break on */
365 #define C_CM_CLR_BREAK 0x44 /* Tx break off */
366 #define C_CM_CMD_DONE 0x45 /* Previous command done */
367 #define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
368 #define C_CM_TINACT 0x51 /* set inactivity detection */
369 #define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
370 #define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
371 #define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
372 #define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
373 #define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
374 #define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
375 #define C_CM_Q_ENABLE 0x58 /* enables queue access from the
376 driver */
377 #define C_CM_Q_DISABLE 0x59 /* disables queue access from the
378 driver */
379
380 #define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
381 #define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
382 #define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
383 #define C_CM_RXNNDT 0x63 /* rx no new data timeout */
384 #define C_CM_TXFEMPTY 0x64
385 #define C_CM_ICHAR 0x65
386 #define C_CM_MDCD 0x70 /* modem DCD change */
387 #define C_CM_MDSR 0x71 /* modem DSR change */
388 #define C_CM_MRI 0x72 /* modem RI change */
389 #define C_CM_MCTS 0x73 /* modem CTS change */
390 #define C_CM_MRTS 0x74 /* modem RTS drop */
391 #define C_CM_RXBRK 0x84 /* Break received */
392 #define C_CM_PR_ERROR 0x85 /* Parity error */
393 #define C_CM_FR_ERROR 0x86 /* Frame error */
394 #define C_CM_OVR_ERROR 0x87 /* Overrun error */
395 #define C_CM_RXOFL 0x88 /* RX buffer overflow */
396 #define C_CM_CMDERROR 0x90 /* command error */
397 #define C_CM_FATAL 0x91 /* fatal error */
398 #define C_CM_HW_RESET 0x92 /* reset board */
399
400 /*
401 * CH_CTRL - This per port structure contains all parameters
402 * that control an specific port. It can be seen as the
403 * configuration registers of a "super-serial-controller".
404 */
405
406 struct CH_CTRL {
407 uclong op_mode; /* operation mode */
408 uclong intr_enable; /* interrupt masking */
409 uclong sw_flow; /* SW flow control */
410 uclong flow_status; /* output flow status */
411 uclong comm_baud; /* baud rate - numerically specified */
412 uclong comm_parity; /* parity */
413 uclong comm_data_l; /* data length/stop */
414 uclong comm_flags; /* other flags */
415 uclong hw_flow; /* HW flow control */
416 uclong rs_control; /* RS-232 outputs */
417 uclong rs_status; /* RS-232 inputs */
418 uclong flow_xon; /* xon char */
419 uclong flow_xoff; /* xoff char */
420 uclong hw_overflow; /* hw overflow counter */
421 uclong sw_overflow; /* sw overflow counter */
422 uclong comm_error; /* frame/parity error counter */
423 uclong ichar;
424 uclong filler[7];
425 };
426
427
428 /*
429 * BUF_CTRL - This per channel structure contains
430 * all Tx and Rx buffer control for a given channel.
431 */
432
433 struct BUF_CTRL {
434 uclong flag_dma; /* buffers are in Host memory */
435 uclong tx_bufaddr; /* address of the tx buffer */
436 uclong tx_bufsize; /* tx buffer size */
437 uclong tx_threshold; /* tx low water mark */
438 uclong tx_get; /* tail index tx buf */
439 uclong tx_put; /* head index tx buf */
440 uclong rx_bufaddr; /* address of the rx buffer */
441 uclong rx_bufsize; /* rx buffer size */
442 uclong rx_threshold; /* rx high water mark */
443 uclong rx_get; /* tail index rx buf */
444 uclong rx_put; /* head index rx buf */
445 uclong filler[5]; /* filler to align structures */
446 };
447
448 /*
449 * BOARD_CTRL - This per board structure contains all global
450 * control fields related to the board.
451 */
452
453 struct BOARD_CTRL {
454
455 /* static info provided by the on-board CPU */
456 uclong n_channel; /* number of channels */
457 uclong fw_version; /* firmware version */
458
459 /* static info provided by the driver */
460 uclong op_system; /* op_system id */
461 uclong dr_version; /* driver version */
462
463 /* board control area */
464 uclong inactivity; /* inactivity control */
465
466 /* host to FW commands */
467 uclong hcmd_channel; /* channel number */
468 uclong hcmd_param; /* pointer to parameters */
469
470 /* FW to Host commands */
471 uclong fwcmd_channel; /* channel number */
472 uclong fwcmd_param; /* pointer to parameters */
473 uclong zf_int_queue_addr; /* offset for INT_QUEUE structure */
474
475 /* filler so the structures are aligned */
476 uclong filler[6];
477 };
478
479 /* Host Interrupt Queue */
480
481 #define QUEUE_SIZE (10*MAX_CHAN)
482
483 struct INT_QUEUE {
484 unsigned char intr_code[QUEUE_SIZE];
485 unsigned long channel[QUEUE_SIZE];
486 unsigned long param[QUEUE_SIZE];
487 unsigned long put;
488 unsigned long get;
489 };
490
491 /*
492 * ZFW_CTRL - This is the data structure that includes all other
493 * data structures used by the Firmware.
494 */
495
496 struct ZFW_CTRL {
497 struct BOARD_CTRL board_ctrl;
498 struct CH_CTRL ch_ctrl[MAX_CHAN];
499 struct BUF_CTRL buf_ctrl[MAX_CHAN];
500 };
501
502 /****************** ****************** *******************/
503 #endif
504
505 /* Per card data structure */
506 struct cyclades_card {
507 unsigned long base_phys;
508 unsigned long ctl_phys;
509 unsigned long base_addr;
510 unsigned long ctl_addr;
511 int irq;
512 int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */
513 int first_line; /* minor number of first channel on card */
514 int nports; /* Number of ports in the card */
515 int bus_index; /* address shift - 0 for ISA, 1 for PCI */
516 int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */
517 #ifdef __KERNEL__
518 spinlock_t card_lock;
519 #else
520 uclong filler;
521 #endif
522 };
523
524 struct cyclades_chip {
525 int filler;
526 };
527
528
529 #ifdef __KERNEL__
530
531 /***************************************
532 * Memory access functions/macros *
533 * (required to support Alpha systems) *
534 ***************************************/
535
536 #define cy_writeb(port,val) {writeb((ucchar)(val),(ulong)(port)); mb();}
537 #define cy_writew(port,val) {writew((ushort)(val),(ulong)(port)); mb();}
538 #define cy_writel(port,val) {writel((uclong)(val),(ulong)(port)); mb();}
539
540 #define cy_readb(port) readb(port)
541 #define cy_readw(port) readw(port)
542 #define cy_readl(port) readl(port)
543
544 /*
545 * Statistics counters
546 */
547 struct cyclades_icount {
548 __u32 cts, dsr, rng, dcd, tx, rx;
549 __u32 frame, parity, overrun, brk;
550 __u32 buf_overrun;
551 };
552
553 /*
554 * This is our internal structure for each serial port's state.
555 *
556 * Many fields are paralleled by the structure used by the serial_struct
557 * structure.
558 *
559 * For definitions of the flags field, see tty.h
560 */
561
562 struct cyclades_port {
563 int magic;
564 int card;
565 int line;
566 int flags; /* defined in tty.h */
567 int type; /* UART type */
568 struct tty_struct *tty;
569 int read_status_mask;
570 int ignore_status_mask;
571 int timeout;
572 int xmit_fifo_size;
573 int cor1,cor2,cor3,cor4,cor5;
574 int tbpr,tco,rbpr,rco;
575 int baud;
576 int rflow;
577 int rtsdtr_inv;
578 int chip_rev;
579 int custom_divisor;
580 int x_char; /* to be pushed out ASAP */
581 int close_delay;
582 unsigned short closing_wait;
583 unsigned long event;
584 unsigned long last_active;
585 int count; /* # of fd on device */
586 int breakon;
587 int breakoff;
588 int blocked_open; /* # of blocked opens */
589 long session; /* Session of opening process */
590 long pgrp; /* pgrp of opening process */
591 unsigned char *xmit_buf;
592 int xmit_head;
593 int xmit_tail;
594 int xmit_cnt;
595 int default_threshold;
596 int default_timeout;
597 unsigned long jiffies[3];
598 unsigned long rflush_count;
599 struct termios normal_termios;
600 struct termios callout_termios;
601 struct cyclades_monitor mon;
602 struct cyclades_idle_stats idle_stats;
603 struct cyclades_icount icount;
604 struct tq_struct tqueue;
605 wait_queue_head_t open_wait;
606 wait_queue_head_t close_wait;
607 wait_queue_head_t shutdown_wait;
608 wait_queue_head_t delta_msr_wait;
609 };
610
611 /*
612 * Events are used to schedule things to happen at timer-interrupt
613 * time, instead of at cy interrupt time.
614 */
615 #define Cy_EVENT_READ_PROCESS 0
616 #define Cy_EVENT_WRITE_WAKEUP 1
617 #define Cy_EVENT_HANGUP 2
618 #define Cy_EVENT_BREAK 3
619 #define Cy_EVENT_OPEN_WAKEUP 4
620 #define Cy_EVENT_SHUTDOWN_WAKEUP 5
621 #define Cy_EVENT_DELTA_WAKEUP 6
622 #define Cy_EVENT_Z_RX_FULL 7
623
624 #define CLOSING_WAIT_DELAY 30*HZ
625 #define CY_CLOSING_WAIT_NONE 65535
626 #define CY_CLOSING_WAIT_INF 0
627
628
629 #define CyMAX_CHIPS_PER_CARD 8
630 #define CyMAX_CHAR_FIFO 12
631 #define CyPORTS_PER_CHIP 4
632 #define CD1400_MAX_SPEED 115200
633
634 #define CyISA_Ywin 0x2000
635
636 #define CyPCI_Ywin 0x4000
637 #define CyPCI_Yctl 0x80
638 #define CyPCI_Zctl CTRL_WINDOW_SIZE
639 #define CyPCI_Zwin 0x80000
640 #define CyPCI_Ze_win (2 * CyPCI_Zwin)
641
642 #define PCI_DEVICE_ID_MASK 0x06
643
644 /**** CD1400 registers ****/
645
646 #define CD1400_REV_G 0x46
647 #define CD1400_REV_J 0x48
648
649 #define CyRegSize 0x0400
650 #define Cy_HwReset 0x1400
651 #define Cy_ClrIntr 0x1800
652 #define Cy_EpldRev 0x1e00
653
654 /* Global Registers */
655
656 #define CyGFRCR (0x40*2)
657 #define CyRevE (44)
658 #define CyCAR (0x68*2)
659 #define CyCHAN_0 (0x00)
660 #define CyCHAN_1 (0x01)
661 #define CyCHAN_2 (0x02)
662 #define CyCHAN_3 (0x03)
663 #define CyGCR (0x4B*2)
664 #define CyCH0_SERIAL (0x00)
665 #define CyCH0_PARALLEL (0x80)
666 #define CySVRR (0x67*2)
667 #define CySRModem (0x04)
668 #define CySRTransmit (0x02)
669 #define CySRReceive (0x01)
670 #define CyRICR (0x44*2)
671 #define CyTICR (0x45*2)
672 #define CyMICR (0x46*2)
673 #define CyICR0 (0x00)
674 #define CyICR1 (0x01)
675 #define CyICR2 (0x02)
676 #define CyICR3 (0x03)
677 #define CyRIR (0x6B*2)
678 #define CyTIR (0x6A*2)
679 #define CyMIR (0x69*2)
680 #define CyIRDirEq (0x80)
681 #define CyIRBusy (0x40)
682 #define CyIRUnfair (0x20)
683 #define CyIRContext (0x1C)
684 #define CyIRChannel (0x03)
685 #define CyPPR (0x7E*2)
686 #define CyCLOCK_20_1MS (0x27)
687 #define CyCLOCK_25_1MS (0x31)
688 #define CyCLOCK_25_5MS (0xf4)
689 #define CyCLOCK_60_1MS (0x75)
690 #define CyCLOCK_60_2MS (0xea)
691
692 /* Virtual Registers */
693
694 #define CyRIVR (0x43*2)
695 #define CyTIVR (0x42*2)
696 #define CyMIVR (0x41*2)
697 #define CyIVRMask (0x07)
698 #define CyIVRRxEx (0x07)
699 #define CyIVRRxOK (0x03)
700 #define CyIVRTxOK (0x02)
701 #define CyIVRMdmOK (0x01)
702 #define CyTDR (0x63*2)
703 #define CyRDSR (0x62*2)
704 #define CyTIMEOUT (0x80)
705 #define CySPECHAR (0x70)
706 #define CyBREAK (0x08)
707 #define CyPARITY (0x04)
708 #define CyFRAME (0x02)
709 #define CyOVERRUN (0x01)
710 #define CyMISR (0x4C*2)
711 /* see CyMCOR_ and CyMSVR_ for bits*/
712 #define CyEOSRR (0x60*2)
713
714 /* Channel Registers */
715
716 #define CyLIVR (0x18*2)
717 #define CyMscsr (0x01)
718 #define CyTdsr (0x02)
719 #define CyRgdsr (0x03)
720 #define CyRedsr (0x07)
721 #define CyCCR (0x05*2)
722 /* Format 1 */
723 #define CyCHAN_RESET (0x80)
724 #define CyCHIP_RESET (0x81)
725 #define CyFlushTransFIFO (0x82)
726 /* Format 2 */
727 #define CyCOR_CHANGE (0x40)
728 #define CyCOR1ch (0x02)
729 #define CyCOR2ch (0x04)
730 #define CyCOR3ch (0x08)
731 /* Format 3 */
732 #define CySEND_SPEC_1 (0x21)
733 #define CySEND_SPEC_2 (0x22)
734 #define CySEND_SPEC_3 (0x23)
735 #define CySEND_SPEC_4 (0x24)
736 /* Format 4 */
737 #define CyCHAN_CTL (0x10)
738 #define CyDIS_RCVR (0x01)
739 #define CyENB_RCVR (0x02)
740 #define CyDIS_XMTR (0x04)
741 #define CyENB_XMTR (0x08)
742 #define CySRER (0x06*2)
743 #define CyMdmCh (0x80)
744 #define CyRxData (0x10)
745 #define CyTxRdy (0x04)
746 #define CyTxMpty (0x02)
747 #define CyNNDT (0x01)
748 #define CyCOR1 (0x08*2)
749 #define CyPARITY_NONE (0x00)
750 #define CyPARITY_0 (0x20)
751 #define CyPARITY_1 (0xA0)
752 #define CyPARITY_E (0x40)
753 #define CyPARITY_O (0xC0)
754 #define Cy_1_STOP (0x00)
755 #define Cy_1_5_STOP (0x04)
756 #define Cy_2_STOP (0x08)
757 #define Cy_5_BITS (0x00)
758 #define Cy_6_BITS (0x01)
759 #define Cy_7_BITS (0x02)
760 #define Cy_8_BITS (0x03)
761 #define CyCOR2 (0x09*2)
762 #define CyIXM (0x80)
763 #define CyTxIBE (0x40)
764 #define CyETC (0x20)
765 #define CyAUTO_TXFL (0x60)
766 #define CyLLM (0x10)
767 #define CyRLM (0x08)
768 #define CyRtsAO (0x04)
769 #define CyCtsAE (0x02)
770 #define CyDsrAE (0x01)
771 #define CyCOR3 (0x0A*2)
772 #define CySPL_CH_DRANGE (0x80) /* special character detect range */
773 #define CySPL_CH_DET1 (0x40) /* enable special character detection
774 on SCHR4-SCHR3 */
775 #define CyFL_CTRL_TRNSP (0x20) /* Flow Control Transparency */
776 #define CySPL_CH_DET2 (0x10) /* Enable special character detection
777 on SCHR2-SCHR1 */
778 #define CyREC_FIFO (0x0F) /* Receive FIFO threshold */
779 #define CyCOR4 (0x1E*2)
780 #define CyCOR5 (0x1F*2)
781 #define CyCCSR (0x0B*2)
782 #define CyRxEN (0x80)
783 #define CyRxFloff (0x40)
784 #define CyRxFlon (0x20)
785 #define CyTxEN (0x08)
786 #define CyTxFloff (0x04)
787 #define CyTxFlon (0x02)
788 #define CyRDCR (0x0E*2)
789 #define CySCHR1 (0x1A*2)
790 #define CySCHR2 (0x1B*2)
791 #define CySCHR3 (0x1C*2)
792 #define CySCHR4 (0x1D*2)
793 #define CySCRL (0x22*2)
794 #define CySCRH (0x23*2)
795 #define CyLNC (0x24*2)
796 #define CyMCOR1 (0x15*2)
797 #define CyMCOR2 (0x16*2)
798 #define CyRTPR (0x21*2)
799 #define CyMSVR1 (0x6C*2)
800 #define CyMSVR2 (0x6D*2)
801 #define CyANY_DELTA (0xF0)
802 #define CyDSR (0x80)
803 #define CyCTS (0x40)
804 #define CyRI (0x20)
805 #define CyDCD (0x10)
806 #define CyDTR (0x02)
807 #define CyRTS (0x01)
808 #define CyPVSR (0x6F*2)
809 #define CyRBPR (0x78*2)
810 #define CyRCOR (0x7C*2)
811 #define CyTBPR (0x72*2)
812 #define CyTCOR (0x76*2)
813
814 /* Custom Registers */
815
816 #define CyPLX_VER (0x3400)
817 #define PLX_9050 0x0b
818 #define PLX_9060 0x0c
819 #define PLX_9080 0x0d
820
821 /***************************************************************************/
822
823 #endif /* __KERNEL__ */
824 #endif /* _LINUX_CYCLADES_H */
825
This page was automatically generated by the
LXR engine.
Visit the LXR main site for more
information.